Advanced Lifeline 75-2 Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de seguridad Advanced Lifeline 75-2. Advanced Lifeline 75-2 16 páginas.

Step 1. Inspect lifeline hardware (snap hooks, ferrules,

thimbles, etc.). These items must not be damaged, broken or

distorted. These items must be free of sharp edges, burrs,

cracks,

worn parts, or corrosion. Hook gates must move freely and

lock upon closing.

Step 2. Inspect the lifeline per the following:

SYNTHETIC ROPE: Inspect rope for concentrated wear.

Material must be free of frayed

strands, broken yarns, cuts, abrasions, burns, and

discoloration. The rope must be free

of knots, excessive soiling, paint build-up, and rust staining.

Rope splices must be tight,

with five full tucks, and thimbles must be held firmly by the

splice. Check for chemical

or heat damage; indicated by brown, discolored, or brittle

areas. Check for ultraviolet

damage; indicated by discoloration and splinters and slivers

along the rope surface. All

of the above factors are known to reduce rope strength.

Damaged or questionable rope

should be replaced.

Step 3. Inspect labels. All labels must be present and fully

legible.

Step 4. Inspect each system component or subsystem

according to manufacturer's instructions.

Step 5. Record the inspection date and results in the

inspection log in Section 10.

If inspection reveals an unsafe or defective condition,

remove equipment from service and destroy, or contact an

authorized service center for repair.

Advanced Safety Solutions Inc. / Avella, PA / 844-657-1750