Follett VU155N Series Manual de instalación, uso y mantenimiento - Página 7

Navegue en línea o descargue pdf Manual de instalación, uso y mantenimiento para Dispensador de agua Follett VU155N Series. Follett VU155N Series 20 páginas. Ice and water dispensers
También para Follett VU155N Series: Especificaciones (2 páginas), Manual de instalación, uso y mantenimiento (20 páginas)

Follett VU155N Series Manual de instalación, uso y mantenimiento

Field wiring diagrams

Note: Field wiring diagrams are intended to aid electricians or technicians in understanding how equipment
works. All field wiring must be installed in accordance with all local and NEC codes.
If attaching optional Chewblet FC400A
auto-fill icemaker kit(s)
DISPENSER
LEFT JUNCTION BOX
RIGHT JUNCTION BOX
Electric
Power
Source
W
B
GND
GRN
Installing optional auto-fill icemaker kit(s)
Correct installation of remote icemaker(s) is critical to proper performance of icemaker. Refer to installation
manual packed with icemaker for important details on ice transport tube run, ventilation requirements and other
installation requirements. Failure to comply with instructions may void warranty.
To start and operate dispenser
1. Follow detailed cleaning instructions in service manual before operating dispenser.
2. For manual load units, remove front drain pan or rear lid and fill storage area with approved ice.
Note: Follett manual load dispensers can accommodate most cube/cubelet ices up to 1" square, or Follett
compressed nugget ice. Crushed, flake, bagged, nugget or congealed ice cannot be used. Use of these
ices can jam dispenser and void warranty. Separate any "waffle-like" sections of cubes before adding to
dispenser. For ice compatibility questions, please call Follett customer service at (800) 523-9361
or (888) 2-FOLLETT or (610) 252-7301.
3. Turn power switch located on dispenser control box to ON position.
4. For automatic fill units, follow detailed instructions in icemaker installation section of installation manual, then
turn icemaker (bin signal) switch(es) located on dispenser control box to ON position and begin to make ice.
5. When dispenser has at least 6" (153mm) of ice in storage area, test operation.
BL
Y
RD
ICEMAKER #1
(OPTIONAL)
ELECTRIC
POWER
LOWER JUNCTION BOX
SOURCE
B
W
ICEMAKER #2
(OPTIONAL)
ELECTRIC
POWER
LOWER JUNCTION BOX
SOURCE
W
B
7
UPPER JUNCTION BOX
W
X
B
B
GRN
GND
X
W
GRN
BL
Y
RD
UPPER JUNCTION BOX
W
B
GRN
GND
X
LEGEND
WIRENUT FIELD
CONNECTIONS
EQUIPMENT
GROUND
BLACK
WHITE
GREEN
BLUE
YELLOW
RED