COMCRAFT RM-100UTP Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Hardware de red COMCRAFT RM-100UTP. COMCRAFT RM-100UTP 8 páginas. Single port 10/100utp tap
Imprimir páginaw w w . l a n - w a n - t a p . c o m
Page 5
2.5 Power Failure
The uninterrupted link in the network guarantees permanent
network connectivity, also when power fails. Redundant
powering guarantees maximum uptime of the monitor ports.
No data is passed to the TAP ports at power failure.
3. Installation
a. Power the unit using the 12V PSU, the Power LED lights
b. Connect it into the network using Category 5 UTP cables.
Network Port A : to DCE by straight Cable / to DTE by cross-over cable.
Network Port B : to DTE by straight Cable / to DCE by cross-over cable.
TAP port A and B : to analyzer through straight cables (pins 3/6 active).
The maximum distance between any of the connected devices is 90mtr.
TAP port A mirrors data received in Port A, TAP port B mirrors data
received in Port B.