Daihan Scientific WUC-A03H Manual del usuario - Página 17
Navegue en línea o descargue pdf Manual del usuario para Limpiador ultrasónico de joyas Daihan Scientific WUC-A03H. Daihan Scientific WUC-A03H 18 páginas. Analog ultrasonic cleaners
Imprimir página
DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
professional.
CLEANING
1. Before cleaning the unit, disconnect the power cord from the wall socket. Otherwise, it may
cause an electric shock or fire.
2. To clean the unit, a neutral detergent and soft cloth is recommended. Do not use coarse
cloth, strong chemicals or organic solutions.
3. Do not use water, Benzene, Thinner or any alcohol for cleaning the product. It may cause
discoloration, damage, an electric shock or fire.
4. If you expect damage by a chemical during cleaning, call technical support team.
4. Products Management
4.3 If product Defect Occur
Situation
No Power
Increasing temperature in Bath
Off Heat-on indicator during
Heat-on mode
No Ultrasonic operation during
Heat-on indicate
※ If you have any problem other than the above, please call technical service of manufacturer
or an official agent.
DAIHAN Scientific, Analog Ultrasonic Cleaners " WUC-A "
Confirmations and Solutions
Check the connection of power.
-
Check the Fuse-holder.
-
During the operation, temperature should be up to max.
70-80 with no damages of equipment.
℃
Normal state (The time for sensor adjustment of the
temperature to keep)
Caused the damages from Ultrasonic circuit and request
A/S repair service.
17/36