Amprobe AM-420 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Multímetro Amprobe AM-420. Amprobe AM-420 16 páginas. Digital multimeter

SYMBOLS

Caution! Risk of electric shock.

�

Caution! Refer to the explanation in this manual.

Alternating Current (AC).

Direct Current (DC).

The equipment is protected by double insulation or reinforced insulation.

Earth (Ground).

Battery.

�

Complies with European Directives.

�

Conforms to relevant Australian Standards

)

Canadian Standards Association (NRTL/C)

Do not dispose of this product as unsorted municipal waste. Contact a

qualified recycler.

The Meter complies with:

IEC/EN 61010-1 3rd Edition, UL61010-1 2nd Ed. and CAN/CSA C22.2 No.

61010-1-04 + CSA Update No.1: 2008 to Category II 250 Volts, Pollution degree 2

IEC/EN 61010-2-030

IEC/EN 61010-2-31 for test leads

EMC IEC/EN 61326-1

"This product has been tested to the requirements of CAN/CSA-C22.2 No.

61010-1, second edition, including Amendment 1, or a later version of the same

standard incorporating the same level of testing requirements".

Measurement Category II (CAT II) is for measurements performed on circuit

directly connected to the low voltage installation. Examples are measurements

on house hold appliances, portable tools and similar equipment.

CENELEC Directives

The instruments conform to CENELEC Low-voltage directive 2006/95/EC and

Electromagnetic compatibility directive 2004/108/EC

X�

Warning: Read Before Using

• To avoid possible electrical shock or personal injury, follow these

instructions and use the Meter only as specified in this manual.

• Do not use the Meter or test leads if they appear damaged, or if the Meter

is not operating properly. If in doubt, have the Meter serviced.

• Always use the proper function and range for measurements.

• Before rotating the function range selection switch, disconnect test probe

from circuit under test.

• Verify the Meter's operation by measuring on a known source.