Follett 6300 Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Lector de códigos de barras Follett 6300. Follett 6300 4 páginas. Wireless scanner

Follett 6300 Wireless Scanner - Troubleshooting and Re-

Pairing Steps

Friday, November 18, 2022

Here are several steps to take when troubleshooting these scanners. Start with step 1 and continue

until the problem seems to be resolved.

1. Make sure all cables are plugged in properly to the cradle, the computer, and a power outlet. This

document has pictures showing how they should be plugged in:

Scanner – Cable Connection Guide

From <https://www.granitemedia.org/library-resources/#library-management>

If you find a problem with any of these, correct it, and then place the scanner into the cradle for a few

seconds, and test again to see if that resolved the issue.

a. If it was an issue with the power cable, the scanner may need to recharge in the cradle for a few

minutes before you can start testing or using it.

b. If the problem was with the connection to the computer, you may need to reboot the computer

after correcting the connection.

2. Unplugging the cables from the cradle for a few seconds and then plugging them back in, then placing

the scanner in the cradle can sometimes reset the cradle and get it working again.

3. If it seems the scanner is successfully scanning barcodes but they are not being sent to the computer, try

plugging the USB cord from the cradle into a different USB port on the computer. I've found that for

whatever reason some USB ports on some computers just don't work with these scanners, and if you

switch to a different port it will suddenly work.

4. Page 17 of the Quick Reference Guide has a key to the various light indicators on the scanner and the

cradle, which can help you figure out what the issue might be. (A printed copy came with the scanner, or

12:01 PM

November 2022 Page 1

Follett 6300 Cordless Barcode