Carbon Health LogBand CH-M1-11 Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Fitness Trackers Carbon Health LogBand CH-M1-11. Carbon Health LogBand CH-M1-11 2 páginas.

Imprimir página
Contents
USB Adapter
Resizing the band
If the band is too long for your wrist the band can be shortened by cutting the links with scissors.
1 - Remove LogBand from your wrist
2- Identify the section between the links where you would like to make the cut
3 - Carefully cut the band with scissors following the groove between the magnetic links.
Warning: Please only use scissors in a safe manner. Do not cut the band while it is on your wrist.
When using scissors remove the minimum number of links needed from each end. Cut in a direction away
from your body and fingers, hands, arms and legs. Do not attempt to catch a dropped pair of scissors
Logging overview
Band
Module
Setting up your LogBand
Charge your LogBand
1
There are two ways to charge your LogBand:
1 - Plug your LogBand module into a USB- A port.
2 - Insert the LogBand module into the Adapter
provided and plug this into a USB-C port.
Charge until the LED turns solid green. This will
take around 1 hour.
1 - Charging via USB-A port
USB-A port
2 - Charging via adapter
USB-C port
Adapter
Status LED
Status LED
LED off: Normal operation
Flashing green: Module in pairing mode
Solid orange: The battery is charging
Solid green: The battery is fully charged
Flashing red: The battery requires charging
Download the Carbon
2
Health App
Download the Carbon Health app on your
smartphone and log in to your account. If you don't
have an account you can create one at this time.
Scan this QR code to download the app
Note: If you already have
the app, scanning this will
automatically take you to step
3 in the setup.
3
Get connected
Connect your LogBand to your Carbon App via the
devices tab in the app. Follow the instructions in
the app to set up your device.
Insert module into the
4
band
Insert the module into the opening on the
underside of the band. Ensure the 'USB end' of
the module points towards the Carbon logo on the
band and the buttons face upwards.