DPCAV DIVERSITY DEMON FPV PRO RACE EDITION Manual - Página 8
Navegue en línea o descargue pdf Manual para Receptor estéreo DPCAV DIVERSITY DEMON FPV PRO RACE EDITION. DPCAV DIVERSITY DEMON FPV PRO RACE EDITION 12 páginas. Tri-diversity video controller
Imprimir página
The LED patterns are arranged as simple patterns of short and long blinks. The following table
outlines the blink codes (
STEP
VID2 LED
1
S
2
S
3
S
4
S
5
S
6
S
7
S
8
S
S
P
TART OF
ROGRAMMING
Programming begins by holding down the pushbutton switch while you apply power. Continue to
press the switch until the Red S
When you are ready start programming, release the switch. RX1's green LED blink pattern will
indicate the step number.
S
Step 1:
This entry must be set to match the composite video type used by your camera and
display monitor. For example, press once for NTSC video.
S S
Step 2:
This entry is used to control the audio alert that is heard whenever the video
sources are automatically switched. For example, press twice to disable the chirp
noise.
Diversity Demon ©2016-2017 DIGITAL PRODUCTS COMPANY
S
= short blink,
S
-
S
S
-
-
S
S
S
-
-
-
L
-
S
L
-
-
S
S
L
-
-
-
S
L
L
-
-
-
LED is on. The audio buzzer will also begin to sound off.
TATUS
Video Type.
Range: 1= NTSC, 2= PAL
Switching Alert Chirp
Range: 1= On, 2= Off.
L
= long blink).
DESCRIPTION
Video Type, 1=NTSC / 2=PAL
Switching Alert Chirp, 1=ON / 2=OFF
Missing RX Red LED Alert, 1=ON / 2=OFF
Low Battery Alert Beep, 1=ON / 2=OFF
Main Low Battery Alert Voltage, 6 - 24 VDC
Fractional Low Battery Alert Voltage,
0.0 - 0.9 VDC
Switching Sensitivity, 1=LOWEST, 5=HIGHEST
Video Level Balance Adjustment,
1=ON / 2=SKIP
P
8
AGE
July-31-2017