1byone O00QH-0511 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Accesorios 1byone O00QH-0511. 1byone O00QH-0511 9 páginas. Wireless door chime kits

Imprimir página

Driveway Alert Alarm Instruction Manual

Summary

● Strong anti-interference performance

● The full range of fine temperature compensation

● CE, FCC and ROHS compliant

Speci cation

● Power Supply (Receiver): DC 6 V or 1.5 V C Battery x 3

● Power Supply (PIR Transmitter): DC 4.5 V (1.5 V AAA Battery x 3 )

● Working Current (Receiver Alarming): ＜180mA

● Working Current (Receiver Chiming): ＜200mA

● Working Current (PIR Transmitter): ＜15mA

● Quiescent Current (Receiver): ＜400uA

● Quiescent Current(PIR Transmitter): ＜50uA

● Sensing Angle: 45°

● Sensing Distance: 5–8 m

● Ring Volume: ≥100dB ( within 0.5 m)

● Reception Sensitivity: ≥- 85dBm

Accessories List

● 2 x PIR Transmitters

● 1 x Receiver

● 4 x Wall Plugs

● 4 x Screws

Names for Parts

(1) LED Indicator

(2) Speaker

(4) Switch for Chime, Low, Alarm

(5) On/Off Switch

(7) Auto-learning Code Button

(8) PIR

(1)

(2)

CHIME

LOW

ALARM

● 1 x Instruction Manual

(3) DC 6V Input Jack

(6) Sound-and-Flash Switch Button

(9) LED Indicator

(3)

(5)

OFF

(6)

(7)

(4)

(8)

(9)

Battery Installation (Receiver)

1. Remove the screws on the rear of the Receiver with a cross-headed screwdriver. Remove the

battery compartment cover.

2. Insert three C type batteries in the battery compartment according to the"+ -"marks.

3. Replace the battery compartment cover and secure the screws.

Battery Installation (PIR Transmitter)

1. Remove the screws on the rear of the PIR Transmitter with a cross-headed screwdriver. Remove

the battery compartment cover.

2. Insert three A A A 1.5 V batteries in the battery compartment according to the"+ -"marks in the

battery compartment.

3. Replace the compartment cover and secure the screws.

Wall Mount（Receiver and PIR Transmitter）

PIR Transmitter Unit

Drill a hole on the wall at your required height.

Insert a wall plug (included) into the hole.

Then insert a screw (included) into the wall plug. Be noted

that you should not insert completely the screw into the

wall plug, but keep a suitable length out of the wall surface,

which is to hold the transmitter.

Finally you can hang the transmitter.

(Mounting on UPVC or metal doorframe surfaces will reduce the transmitting range.)

3 x C 1.5V

Alkaline Battery

3xAAA 1.5V

Alkaline Battery