DPS Telecom D-PG-413-11C-00 Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Terminales táctiles DPS Telecom D-PG-413-11C-00. DPS Telecom D-PG-413-11C-00 11 páginas. Digital base terminal package consists of blank card and dvf-64 digital interface card
Imprimir páginaFig. 9 - Back panel provides wire wrap connections for fuse alarm, VF and digital ports.
Network interfaces at DB15 connectors. (See Fig. 6 for pin-out information.) ADPCM and VF connectors are used
Installation (Cont.)
11. Set DIP switch. (See Fig. 5.)
12. Replace card.
LED
Channel A
Channel B
Mode
Link
Fuse Alarm
Fig 10 - KDA LCD and LEDs indicate real-time status of alarms and controls and perform diagnostics. LEDs on
UM118129
with other applications.
Fuse Alarm
Table C - DVF-64 Led Meanings
Color
Meanings
OFF
Channel Off
Solid GRN
Channel active
Flashing GRN
Loss of transmit sync
Flashing RED
Loss of receive sync
Flashing RED/GRN
Loss of both channels
OFF
Channel Off
Solid GRN
Channel active
Flashing GRN
Loss of transmit sync
Flashing RED
Loss of receive sync
Flashing RED/GRN
Loss of both channels
OFF
Repeater switch Off
Solid RED
Repeater switch On and bridged
OFF
No TABS
Flashing GRN
64 Kbit section A active
Flashing RED
64 Kbit section B active
Flashing RED/GRN
Both sections being polled
Solid RED
Blown Fuse
DVF-64 show channel status.
10
13. Replace fuses
14. Test shelf.
Transmit Levels for VF ports
are factory calibrated - Adjust only
if directed by DPS Tech Support
Channel A
Channel B
Link
Mode
D-PG-423-11C-04
August 11, 1999