DR 41416 Manual de seguridad e instrucciones de uso - Página 11

Navegue en línea o descargue pdf Manual de seguridad e instrucciones de uso para Recortadora DR 41416. DR 41416 20 páginas.

Imprimir página

Operating Tips

•
The Hedge Trimmer is used for cutting in either direction in a slow, sweeping action from side to side.
•
Stand so that you are stable and balanced on both feet. Do not overreach.
•
Inspect and clear the area of any hidden objects.
•
Never use the Hedge Trimmer near power lines, fencing, posts, buildings, or other immovable objects.
•
Never use a Blade Set after hitting a hard object without first inspecting it for damage. Do not use if any damage is detected.
•
Never touch the Blade Set or service the Hedge Trimmer with the Battery installed.
•
Do not force the Hedge Trimmer through heavy shrubbery. This can cause the Blades to bind and slow down. If the Blades
slow down, reduce the pace.
•
Do not attempt to cut stems or twigs that are larger than 3/4" in diameter, or those obviously too large to feed into the Blade
Set. Use a non-powered Hand Saw or Pruning Saw to trim large stems.
•
If the Blades do become jammed, stop the Motor and remove the Battery before attempting to remove the obstruction.
•
If desired, you can use a string to help cut your hedge level. Decide how high you want the hedge. Stretch a piece of string
along the hedge at the desired height. Trim the hedge just above the guide line of string.
•
Trim the side of a hedge so that it will be slightly narrower at the top. More of the hedge will be exposed when shaped this way
and it will be more uniform.
•
Wear Gloves when trimming thorny or prickly growth. When trimming new growth, use a wide sweeping action, so that the
stems are fed directly into the Blade Set.
•
Do not use the DR Hedge Trimmer for cutting stems greater than 3/4". Use the Hedge Trimmer only for cutting normal
shrubbery found around houses and buildings.
Additional features
USB Charge Port
The Battery can be used to charge/operate phones or other electronic devices
that use a USB cord.
1.
Remove the Battery from the tool.
2.
Plug the device into the USB Port of the Battery (Figure 10).
Figure 10
CONTACT US AT www.DRpower.com
USB Port
11