AMS AS5162 Manual de programación - Página 5
Navegue en línea o descargue pdf Manual de programación para Accesorios AMS AS5162. AMS AS5162 14 páginas.
Imprimir página
User Manual – AS5x61/AS5x62 Programming
Figure 1 AS5x6y GUI
3) Choose the right device AS5162(singleDIE) or AS5262(dualDIE)
4) Click
5) Enter beginning angle, T1. Two methods are possible:
a. Manually enter an initial position value into "T1 Cordic" field or "T1 (°),or
b. Move magnet assembly to initial position and click "Get". This will take the value
related to the magnet current physical location as the Cordic register initial position.
6) Enter final angle, T2. Two methods are possible, except that this position is the final
position of the magnet's rotation.
a. Manually enter a final position value into "T2 Cordic" field or "T2 (°)", or
b. Move magnet assembly to final position and click "Get". This will take the value
related to the magnet current physical location as the Cordic register initial position.
7)
8) Enter
9) Enter
10) Enter
11) Enter
www.ams.com
This is V
at the initial magnet position.
OUT
This is V
at the final magnet position.
OUT
Clamping Level Low is the voltage at the lower guard band.
Clamping Level High is the voltage at the upper guard band.
Revision 1.0 / 10/31/12
page 4/14