AMS AS7221 Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Accesorios AMS AS7221. AMS AS7221 17 páginas. Smart lighting integration kit (slik)
Imprimir página
AS7221
Smart Lighting Integration Kit (SLIK) User Guide
1
AS7221 SLIK Overview
The AS7221 Smart Lighting Integration Kit (SLIK) is a complete color tuning luminaire reference
design solution, built around the ams AS7221 Network-Enabled Smart Lighting Manager.
The AS7221 SLIK is built from three interconnected modules: an AS7221 module, a Bluetooth
module and an LED module with two strings of white LEDs for tuning (warm and cool). It is shipped
with the LED module removed and mounted on the AS7221 module to allow for diffusion and
sensing of the LED light by the AS7221. For operation of the SLIK as shipped, which includes a
diffuser, refer to the ams Dashboard software and documentation, which is also included on the
SLIK USB memory stick.
The AS7221 SLIK can also be used with only one or two of the modules, depending on usage.
Such operation is described in this document.
Note that this SLIK user guide document applies to the AS7221 SLIK a0061e0_CSS board
assembly.
In the AS7221 SLIK box
•
A fully assembled three-module AS7221 SLIK (a0061e0_CSS board assembly)
•
Optional AS4531 assembly for adding Daylighting operation to the AS7221 SLIK
•
SLIK AC/DC 12V power supply (including US plug adapter, as required)
•
USB cable assembly for installation into the SLIK (for serial UART interface dashboard
connectivity)
•
USB stick containing SLIK User Guide (this document), ams Spectral Sensor Dashboard
software and associated user guide, and the latest AS7221 device datasheet
Powering up SLIK
The AS7221 SLIK will power up with the following default factory settings:
•
Assumes 12VIN operation with AS7221 factory MODE setting (MODE = 0)
•
Color Tuning is enabled
•
External dimming control is enabled
•
External occupancy control input is in standby, but automatically enables upon first usage
•
Computer communication, for AS7221 Dashboard operation, is done using the ams
provided USB cable which is installed into SLIK after installing software from the USB stick.
This USB interface should not be used if using the Bluetooth module (which requires an
ams smartphone app)
The SLIK module configuration is not electrically isolated. Care should be taken to place the
module in the appropriate position to meet electrical and physical safety requirements as set
forth in international standards.
ams Eval Kit Manual
[v3-2-02] 2016-Jan-02
Page 4
Document Feedback