1byone O0000-0555 Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Antena de TV 1byone O0000-0555. 1byone O0000-0555 2 páginas. Amplified vhf & uhf combo tv antenna with j-pole mount

Imprimir página
Amplified VHF & UHF Combo TV Antenna
What's in the box?
Antenna x1
Power Supply Unit (PSU) x1 1.5m coaxial cable (from PSU to TV) x1
Mounting Base x 1
User Manual x 1
Φ6mm hexagon nut x3
Antenna Specification
Frequency
Impedance
Range
174-230MHz
470-862MHz
PSU Specification
Power Input
40-862MHz
AC110V 60Hz DC12V 100mA
How To Install
Step 1. Unfold the VHF elements (U-shape, next to the bracket) until they're at right angel to the
plas c boom, then fix them with the wing nuts (Refer to Graph. A).
Step 2. A ach the antenna to a pole towards the direc on of your local TV tower, then fix it with
the bracket an
Step 3. Use a piece of coaxial cable to connect the F connector on the antenna, and the F connector
on the PSU marked "IN".
Step 4. Use a piece of coaxial cable to connect the F connector on the PSU marked " TV", and the
Antenna Input on your set-top box or digital TV set.
Step 5. Plug the PSU into a socket, turn on your TV and run a channel scan. If you're not receiving all
your local channels, you may try to adjust the direc on of the antenna in order to find out the
correct direc on of your local TV tower. Don't forget to re-scan the channels ever
change the antenna's direc on.
Φ6*19mm screw x 2 Φ6*43mm screw x 1
Φ7*45 mm Plastic Anchor Bolt x 2
No. of
Elements
8
8-10dBi
Power Output
Insert Loss
IN
TV
ghten the wing nuts (Refer to Graph. B).
with J-Pole Mount
Amplifier
Gain
3-5dBi
18dB
Operating
Temperature
Range
0.8dB
0-40 C
O
STB
or TV
SKU: O0000-0555
21" J-shape Pole x 1
Antenna
Noise Figure
Length
<4dB
465mm
Short-circuit Protection
Orange LED turns red
if short-circuit happens
me you