DR. Heater DR-966 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Calentador DR. Heater DR-966. DR. Heater DR-966 13 páginas. Wall / ceiling mount heater
También para DR. Heater DR-966: Manual del usuario (16 páginas)

Imprimir página

HIGH : 6000W

LOW : 3000W

Select a thermostat setting.

Ambient temperature is regulated by adjusting the thermostat to a

desired position. Allow the unit to operate and warm up the room.

When the desired temperature is reached, turn the control knob

counterclockwise until the heater turns off. This is your ideal

setting. The heater will start automatically when the room

temperature drops below this set point, and will turn off when the

set point is reached.

To turn off the heater, switch off the circuit breaker.

The circuit breaker serves as the power

disconnection means.

This heater includes a visual alarm to warn that parts of the

heater are getting excessively hot. If the alarm flashes,

immediately turn the heater OFF and inspect for any objects, on

or adjacent to the heater that may cause high temperatures. DO

NOT OPERATE THE HEATER WITH THE ALARM FLASHING.

To reset the heater, switch the circuit breaker OFF, and wait five

to ten minutes for the unit to cool down before turning the heater

on.

There is no user maintenance part except regular cleaning as

following description. All other servicing or maintenance should be

performed by qualified service personnel.

Before any cleaning, make sure that:

1. Disconnect power supply at source. Switch off the circuit

breaker.

2. Wait for 60 minutes to ensure the heating element has cool down,

and your heater is now

ready for cleaning.