Airskirts RV Skirt Kit Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Accesorios para automóviles Airskirts RV Skirt Kit. Airskirts RV Skirt Kit 16 páginas.

PREPARING YOUR RV FOR FIRST TIME USE

PREVENT PUNCTURES BY PROTECTING SHARP CORNERS

AirSkirts are extremely puncture resistant and can be placed on normal ground,

cement, gravel, etc. If any sharp objects are on the ground you should remove

them prior to setup. You may want to consider laying down a tarp for extra

protection and to keep your kit clean.

Before beginning setup for the first time, inspect the underside of your RV for

sharp corners. On some RVs these can be found on stabilizer jacks and around

stairs. Inspect your chassis carefully for sharp objects that could puncture your

skirt.

When properly inflated (see inflation instructions) sharp objects should not

puncture your AirSkirts tubes. However, when temperatures rise, air pressure

in your AirSkirts will increase, so we recommend protecting your AirSkirts from

sharp objects and corners with the included protective material.

First, thoroughly clean and dry the area where the protection is required. A wire

brush and / or rubbing alcohol may be required. For 90 degree angled corners,

such as under stairs and stablizers, use the corner protectors, ensuring the

front of the protector faces the tubes. Use the roll of 90 degree flexible tape for

any other areas that need protection. Some RVs won't require any protective

material.

MONITORING AIR PRESSURE

With drastic temperature changes the pressure in your AirSkirts tubes will

change. Higher temperatures will increase the pressure in the tubes while lower

temperatures will decrease the pressure.

It is important to monitor pressure in your tubes during temperature changes.

To let air out of the tubes, simply depress the spring loaded mechanism in the

valve and air will flow out. To add pressure, reconnect your AirSkirts pump.