Electrolux # Manual de uso y mantenimiento - Página 8

Surface Cookin

USING THE WOK STAND

[]

The Wok Stand provided with your cooktop is designed to allow round-bottomed

woks to

be used. It is recommended

that you use a 14 inch diameter

(35.5 cm) or less Wok.

It is recommended

that you use the right front POWER burner with the wok stand for best

performance. If properly positioned, the Wok Stand will not slide off the grate.

To Properly

Position

the Wok Stand:

With the grate in position over the burner, set the Wok Stand on top of the grate positioning

the notches in the Wok Stand over the cooktop grate fingers (See Figure 1).

Flat-bottom

woks with large flat bottoms may also be used on

your cooktop Surface Burner Grates without the Wok Stand (See

Figure 2). Insure the stability of the flat-bottom wok before cooking

without the Wok Stand. If unstable, DO NOT use the flat-bottom

wok without the Wok Stand.

Round-bottom

woks (with

a support

ring)

should NOT

be used (See Figure 3). The

supporting ring was not designed

for proper or stable use on the

Surface Burner Grates.

Proper use of flat-bottom wok

on Surface Burner Grate

Figure 2

Improper use of round-bottom wok

on Surface Burner Grate

Figure 3