Electrolux # Manual del usuario - Página 4

Imprimir página

Vacuum cleaner parts and accessories

Handle release latch

Turbo nozzle

Carrying handle

and dust cup release

Dust cup compartment

Filter screen and

foam filter

(inside dust cup

compartment)

HEPA filter

Indicator lights

Vacuuming carpet and hard-surface floors

Getting started

Remove wand from back of vacuum; push handle onto

wand until it clicks (Fig 1).

Reposition end of wand in opening (Fig. 2).

Align ribs on wand into grooves at top of vacuum (Fig. 3).

Push down Quick Release handle until it locks into

position. Secure hose into hose clip (Fig. 4).

Plug power cord into outlet.

Press power switch to select carpet or hard floor (Fig. 5).

Step on handle release and begin vacuuming (Fig. 6).

Hard-surface floors

Use 'hard floor' setting for wood, tile, or other hard-surface

floors (Fig. 5). Do not use 'carpet' setting for hard-surface

floors, as the brush roll could damage delicate surfaces.

Carpet and rugs

For rugs or carpeted floors, press switch to 'carpet' to

engage brush roll (Fig. 5). The brush roll automatically

adjusts to carpet height.

Hood indicator lights

A blue light indicates the floor setting being used (Fig. 7).

A red light on the hood indicates a problem. If the 'check

filter' light comes on, clean the foam filter. See page 4. If

the 'check brush roll' light comes on, the brush roll is not

operating properly. See page 5.

Quick Release handle

Telescopic wand

Retractable

dusting brush

Brush roll (under hood)

H A R D

F L O O R

O F F

C A R P E T

Fig 1

Fig2

CARPET

OFF

HARD

FLOOR

Fig 5

Fig 6

Carpet/Off/ Hard Floor

switch

Crevice tool

Hose clip

Handle release

Fig 3

Fig 7

Hose

Hose clip

Power cord

Easy release

cord wraps

Hose inlet

Fig 4