AIRSLED MP3400 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Equipamiento industrial AIRSLED MP3400. AIRSLED MP3400 9 páginas. 3-in-1 multi-purpose mover
También para AIRSLED MP3400: Manual del usuario (9 páginas)

Imprimir página
GOING OVER POROUS SURFACES SUCH AS CARPETING
All Airsled systems come with plastic Rough Surface Adapters (RSAs). The RSAs are 10" wide x 36" long
and laid on top of the porous surface. The air beams MUST BE PLACED OVER THE RSAs in order for
your system to perform properly. See figure 6. Your system comes with 6 RSAs allowing you to create a
short track to move the load. If moving the load over long distances, heavy carboard paper such as Ram
®
Board
floor protection can be used. See figure 7.
Figure 6
CARE AND MAINTENANCE
Airsled systems are proudly made in the USA using the highest quality materials. If properly used and maintained,
your Airsled product will have a long service life. To ensure optimal performance and longevity, we recommend the
following:
•
Keep the edges of the air beams from striking hard objects.
•
When moving or repositioning the air beams, avoid dragging the corners.
•
Avoid lifting and carrying the air beams by the inlets. Carrying the air beams by only the inlets may
cause them to come loose over time.
•
Periodically inspect the blower filter and bag depending on model. These components should be
cleaned to ensure peak performance of the system's blower.
•
Check the rubber fabric for rips and dirt. If dirty, water with a mild detergent can be used to clean
them as well as household cleaning sprays such as Windex
®
Armor All
is recommended.
•
If you find any rips in the fabric, please see the Repairs and Refurbishment section.
Figure 5
. To restore the rubber fabric's shine,
®
70 – A Aleph Dr.
Newark, DE 19702
Page 4 of 8
Figure 7
Support Email:
Toll Free Number: 1-800-AIRSLED (1-800-247-7533)