Electrolux Built-In Dishwasher Manual de servicio - Página 26

Navegue en línea o descargue pdf Manual de servicio para Frigorífico Electrolux Built-In Dishwasher. Electrolux Built-In Dishwasher 50 páginas. Built-in oven
También para Electrolux Built-In Dishwasher: Manual de uso y mantenimiento (36 páginas), Manual de uso y mantenimiento (44 páginas), Manual de instrucciones de instalación (28 páginas), Manual de uso y mantenimiento (28 páginas), Manual de uso y mantenimiento (40 páginas), Manual de uso y mantenimiento (27 páginas), Manual de uso y mantenimiento (12 páginas), Manual de uso y mantenimiento (22 páginas), Consejos y recetas (36 páginas), Manual de instrucciones (18 páginas), Manual del propietario (21 páginas), Manual del propietario (13 páginas), Manual del usuario (29 páginas), Manual del usuario (27 páginas), Libro de instrucciones (17 páginas), Libro de instrucciones (15 páginas), Libro de instrucciones (18 páginas), Libro de instrucciones (27 páginas), Libro de instrucciones (18 páginas)

3. Remove the front panel

Proceed as follows to replace the front panel:

1. Position the upper edge of the panel first.

2. Move the lower edge into position

3. First fit the screws which secure the panel to the external casing, then the screws which

secure the panel to the muffle (oven compartment).

IMPORTANT: Before inserting the screws, adjust the position of the front panel so that it is in

alignment with the holes. If necessary, raise the muffle slightly.

If difficulties are encountered when replacing the front panel, proceed as follows:

1. Remove the lateral uprights.

2. Insert the front panel as described above.

3. Fit the internal screws which secure the front panel to the casing.

4. Replace the lateral uprights.

N.B.: Access to the front panel in the manner described above refers to appliances with

serial numbers starting from 336........

In the case of preceding models (a few hundred appliances only), some holes in the

oven casing are not pre-drilled, which makes access more difficult. In order to access

the screws that secure the front panel in position, it is necessary to move the muffle

rearwards (loosen or remove the screws).

SOI 04.04 FV

Fig. 45

26/50

599 35 96-40