Advanced Brewing Systems KoolSource KS-1 Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Sistemas de elaboración de cerveza Advanced Brewing Systems KoolSource KS-1. Advanced Brewing Systems KoolSource KS-1 10 páginas. Nitro-generator single nitro & iced coffee
Imprimir página
➢ Weekly
Clean your KoolSource system by following all instruction carefully
•
USE COLD WATER FOR THE CLEANING PROCESS
•
Prepair cleaning products fron your 1-2 Cold Brew Kit
•
Diluded 30ml of Clearly Cold Step 1 on 4 liters of
cold water.
•
Diluded 30ml of Complete Café Step 2 on 4 liters of
Cold water.
To start the process set the unit to Cleaning Mode by turning the knob counter-clock located in
the back of the machine. (See Picture Cleaning Mode)
•
Remove the down tubes from you RTD Product containers
•
Insert them into you pre-mix Clearly Cold solution Step 1
•
Open your taps to purge the lines until the cleaning solution
Starts to come out and Close Taps.
•
Wait for 5 minutes, open tabs and run the solution for 30sec.
•
Wait for 5 minutes, open tabs and run the soluton to the end.
•
Insert now the down tube into the pre-mix Complete Café solution
•
Open tabs for 30 sec. To eliminated the previous soltuion
•
Wait for 5 minutes, open tabs and run the solution for 30sec.
•
Wait for 5 minutes, open tabs and run the soluton to the end.
•
Insert now the down tube into frech clear cold water
•
Start the Final Rinsing, open tabs until Clear Water start coming out
•
Open Tabs for 30 sec. And close them for 5-10 sec. Repeat this step until your run about
10liters of clear water.
•
DO NOT FORGET TO RETURN THE KNOB TO DISPENSE MODE
•
Last step of your weekly cleaning, clean the system by following instructions on your
DAILY CLEANING INSTRUCTIONS
#INNOVATIONS 4U!
Weekly Cleaning Instructions
in Page 9.
(
Cleaning Mode)
(855)532-5522