1byone 321NA-0001 Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Equipo para DJ 1byone 321NA-0001. 1byone 321NA-0001 14 páginas.

Imprimir página

user-serviceable parts.

• Never leave the machine unattended when it is switched on or

connected to power.

• Never aim the bubble machine at open flames.

• Do not aim the bubble machine directly at people as bubble liquid

may leave permanent markings on clothing.

• Do not transport with liquid. If the machine gets wet, do not use until

it is completely dry.

• Always keep batteries out of the reach of infants and young children

to prevent the batteries from being swallowed. If swallowed, take

immediate action and contact medical authorities for help.

Operation

Included Items

1 x Bubble Machine

1 x Power Adapter

1 x Instruction Manual

Before using the bubble machine for the first time, check the package

contents to ensure all parts are free of visible damage.

Inserting Batteries (Optional)

To insert the batteries, unscrew the screw on the battery compartment

on the top of the machine and remove the compartment cover. Insert

6 C batteries (not included), paying attention to the correct polarity.

Handling and Operation

1. Place the bubble machine on a solid, flat surface and in a well-venti-

lated area.

2. Pour bubble liquid into the liquid reservoir. Always ensure the liquid

level immerses at least one wand. Do not fill the reservoir over the

noted maximum level.

3. If batteries have not been installed, plug the bubble machine into a

grounded electrical outlet. If batteries are installed and the machine

is also connected to an outlet, then outlet power will be used.

4. Turn the ON/OFF/Speed Switch clockwise to Speed Level 1.

5. Turn the Switch again for Speed Level 2.

Attention:

It is normal for the bubble machine to produce less bubbles when

using battery power than when plugged in with the power adapter.

Note:

• Keep the air intake ports free from blockage.

• Do not use outdoors in the rain as this may lead to a short circuit.

• Do not leave unused liquid in the reservoir for an extended period.

The liquid may thicken in the reservoir. Remove all liquid before

storing or moving.

• If the bubble machine is to be mounted using a bracket, please note

the machine should only be inclined to a maximum angle of 15

degrees.

• The bubble machine should not be used for more than 8 hours

consecutively and is best operated at 40º-90ºF (4º-32ºC). Performance

of the machine may be reduced in low temperatures.

Cleaning

1. Empty all bubble liquid from the machine.

2. Rinse and drain the reservoir using a little distilled water.

3. Add some warm distilled water to the maximum level.

4. After adding water, turn on the bubble machine and allow it to run

in a well-ventilated area until all wands appear to be free of residue.

5. Drain the remaining water to complete cleaning.

Note:

• It is recommend to clean the bubble machine after every 40 hours of

operation.

• Do not spin the fan using compressed air to avoid damage.

• Always remove the power adapter from the socket before refilling

the liquid or cleaning the bubble machine.