Bosch 2 Manual de instrucciones e instrucciones de instalación - Página 19

Navegue en línea o descargue pdf Manual de instrucciones e instrucciones de instalación para Lavavajillas Bosch 2. Bosch 2 36 páginas. Mini blender
También para Bosch 2: Manual de instalación rápida (16 páginas), Manual de instalación y uso (18 páginas), Manual de instrucciones original (13 páginas), Manual de instrucciones original (22 páginas), Manual de instrucciones (32 páginas), Manual del usuario (28 páginas), Manual del usuario e instrucciones de instalación (16 páginas), Manual de instrucciones (42 páginas), Manual de instrucciones (8 páginas), Manual de instrucciones (8 páginas), Manual de instrucciones (12 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (9 páginas), Manual del usuario e instrucciones de instalación (48 páginas), Manual de instrucciones (26 páginas), Manual de consulta rápida (2 páginas), Manual del usuario e instrucciones de instalación (24 páginas), Manual de instrucciones (42 páginas), Información de uso (28 páginas), Manual del usuario (40 páginas), Manual del usuario e instrucciones de instalación (35 páginas), Manual del usuario (24 páginas)

Imprimir página
Bosch 2 Manual de instrucciones e instrucciones de instalación

Programme end during - - - -

Rinse Stop
The - - - - Rinse Stop symbol (without
final spin) symbol appears in the display
panel, and the Start button indicator
lamp flashes.
To end the programme:
Select the Spin or Empty
1.
programme.
Press the Start button.
2.

Programme end

The "Ÿš symbol appears in the display
panel, and the Start button indicator
lamp flashes.
If the N Wash/Active indicator light
also flashes, the washing machine has
detected too much foam during the
wash programme and automatically
switches on a rinse cycle to remove the
foam.
Add less detergent to the next
Note:
washing cycle with the same load.
Removing laundry/switching
off the appliance
Open the washing machine door
1.
and remove the laundry.
If you cannot open the
Note:
washing machine door, the
appliance is still locked. Wait until
the programme has ended.
Set the programme selector to the
2.
Off position. The appliance is
switched off.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Scope of delivery ~ Page 26
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Leave the washing machine door
■
and detergent drawer open so that
any residual water can evaporate.
Always remove the laundry.
■
Always wait until the programme has
■
ended, as the appliance could still
be locked.
H

Sensors

A utomatic load sensing
S e n s o r s
The automatic load sensing function
optimally adjusts the water consumption
to each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Place large and small items of
Note:
laundry in the drum (from ~ Page 24).
Sensors
en
19