Bosch 2 Manual del usuario e instrucciones de instalación - Página 10

Imprimir página

Bosch 2 Manual del usuario e instrucciones de instalación

en Preventing material damage

2 Preventing material

damage

Follow these instructions to avoid ma-

terial damage and damage to the ap-

pliance.

ATTENTION!

The functionality of the appliance

may be impaired if you use the

wrong quantity of fabric softener, de-

tergent, care product or cleaning

agent.

Follow the dosage recommenda-

▶

tions from the manufacturer.

Exceeding the maximum load capa-

city impairs the function of the appli-

ance.

Observe the maximum load capa-

▶

city for each programme and do

not exceed it.

→ "Programmes", Page 23

The appliance is secured for trans-

portation using transit bolts. Transit

bolts which have not been removed

may result in material damage and

damage to the appliance.

Before starting up the appliance,

▶

remove the transit bolts completely

and keep them in a safe place.

Before transport, fit the transit bolts

▶

fully in order to prevent damage in

transit.

Material damage may be caused if

the water inlet hose is connected in-

correctly.

Tighten the screw connections on

▶

the water inlet until they are hand-

tight.

Ideally, connect the water inlet

▶

hose directly to the water tap,

without any additional connecting

elements such as adapters, exten-

sions, valves or similar.

Ensure that the inner diameter of

▶

the water tap is at least 17 mm.

Make sure that the length of the

▶

thread on the connection to the

water tap is at least 10 mm.

If the water pressure is too high or

too low, the appliance may not be

able to operate properly.

Ensure that the water pressure in

▶

the water supply system is at least

100 kPa (1 bar) and max.

1000 kPa (10 bar).

If the water pressure exceeds the

▶

maximum value specified, a pres-

sure-reducing valve must be in-

stalled between the drinking water

connection and the hose set of the

appliance.

Do not connect the appliance to

▶

the mixer tap of an unpressurised

hot-water boiler.

Modified or damaged water hoses

may result in material damage and

damage to the appliance.

Never kink, crush, modify or cut

▶

through water hoses.

Only use the water hoses supplied

▶

with the appliance or genuine

spare hoses.

Never re-use water hoses that

▶

have been used before.

Operating the appliance using water

that is dirty or too hot may lead to

material damage and damage to the

appliance.

Only operate the appliance with

▶

cold mains water.

Unsuitable cleaning products may

damage the surfaces of the appli-

ance.

Do not use harsh or abrasive de-

▶

tergents.

Do not use cleaning products with

▶

a high alcohol content.

Do not use hard scouring pads or

▶

cleaning sponges.

Clean the appliance with nothing

▶

but water and a soft, damp cloth.