Bosch 300 DLX Series Manual de uso y mantenimiento - Página 19
Navegue en línea o descargue pdf Manual de uso y mantenimiento para Lavavajillas Bosch 300 DLX Series. Bosch 300 DLX Series 40 páginas.
Imprimir página
Third rack
12 Basic Operation
Basic Operation
Basic Operation
12.1 Protection against unintentional
operation
Your dishwasher has a built in feature to help prevent
unintentional operation, e.g. by children. After starting the
appliance, the door has to be closed within 4 seconds,
otherwise the operation will be paused. If this occurs,
follow the steps below to restart your dishwasher.
For top button controls: Press
1.
For front button controls: Close the door and press
2.
a The wash cycle will resume.
Notes
¡ Unintentional operation is activated when:
– Pressing Start to begin a wash cycle
– Setting Delay time and pressing Start
– Opening the door while Delay time is active
– Opening the door during a wash cycle.
¡ This feature cannot be deactivated.
12.2 Switching on the appliance
Touch
with a short 1 second touch.
▶
The cycle last selected and the option last selected will
be set by default.
The buttons on the appliance are touch sensitive and
only require a quick, gentle touch.
If you do not perform any actions on the appliance for
10 minutes, it will automatically switch off.
12.3 Setting a cycle
To adjust the wash cycle to the soiling level of the
dishware, select a suitable program.
Press the right cycle button.
▶
a The cycle is set and the cycle button flashes.
a The option is set and the option button flashes.
a While the wash cycle is running, a spot of light is
a The wash cycle has ended when no displays on the
a The wash cycle has ended when the spot of light is no
and close the door.
.
a All displays light up.
a As soon as the displays are off, the residual water is
12.4 Setting options
You can set options to complete the chosen wash
program.
Note: The available options depend on which program is
selected.
Press the button for the relevant option.
▶
12.5 Setting the time delay
You can delay the start of the wash cycle via the
Home Connect® app.
Open the Home Connect® app and select the
▶
appliance.
In the settings, you can use the time delay function to
delay the start of the wash cycle.
12.6 Starting the wash cycle
Press
.
▶
projected onto the floor below the appliance door. This
light will not be visible if the appliance is installed at eye
level with the cabinet front fitted flush.
controls are lit.
longer visible on the floor.
Notes
¡ If you want to add more dishware while the appliance is
running, do not use the collecting tray as a handle for
the upper rack. You might touch the partially dissolved
tablet.
¡ You can only change a cycle in progress if you can
cancel it first.
→ "Terminating the wash cycle", Page 19
¡ To save energy, the appliance switches off
automatically 10 minutes after the end of the wash
cycle. If you open the appliance door immediately after
the wash cycle has ended, the appliance will switch off
after 4 seconds.
12.7 Interrupting the wash cycle
Press On/Off.
1.
The program is saved and the appliance switches off.
Press On/Off.
2.
Press
to resume the wash cycle.
3.
12.8 Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
Press
for approx. 4 seconds.
▶
pumped out.
Basic Operation en-us
19