Bosch 800 Series Manual de uso y mantenimiento - Página 6

Imprimir página

Bosch 800 Series Manual de uso y mantenimiento

en-us Preventing material damage

2 Preventing material damage

Preventing material damage

NOTICE:

Harsh chemicals such as bleach-based products can

damage your dishwasher.

Do not use harsh chemicals such as bleach-based

▶

products to clean your dishwasher.

Certain cleaning products may damage the appliance.

Do not use a steam cleaner.

▶

So as not to scratch the finish on the appliance, do not

▶

use sponges with a rough surface or abrasive cleaning

agents.

Avoid stainless steel polish

Do not use stainless steel polish on an anti-fingerprint

▶

finish or a black stainless finish.

Escaping water vapor can damage cabinetry.

When the program ends, let the appliance cool down a

▶

bit before opening the door.

Protect your appliance from the elements.

Protect against freezing to avoid possible damage to

▶

the fill valve. Damage caused by freezing is not covered

by the warranty.

3 Environmental protection and

Environmental protection and energy-saving

energy-saving

Environmental protection and energy-saving

3.1 Saving energy

If you follow these instructions, your appliance will use

less power and water.

Use the Normal program.

a The Normal program is energy-efficient and

environmentally friendly.

→ "Dishwasher Cycles", Page 10

Change the sensor setting to the default.

a Consumption is reduced.

→ "Sensors", Page 6

Zeolith drying automatically helps to save energy.

a → "Zeolith drying

", Page 6

3.2 Zeolith drying

The appliance features a Zeolith container. Zeolith drying

lets you save energy.

Zeolite is a mineral that can store moisture and energy

and then release them again.

During dishwashing energy is used to heat up the washing

water and dry the mineral.

During the drying phase, moisture from the interior of the

dishwasher is stored in the mineral and heat is released.

The heat is blown out into the interior of the dishwasher

with dry air. This speeds up and improves drying.

Therefore, zeolith drying is very efficient.

Note: To avoid impairing Zeolith drying performance, do

not position dishware parts directly in front of the intake

opening or the blow opening of the Zeolith container.

Do not position heat-sensitive dishware parts directly in

front of the blow opening of the Zeolith container.

→ "Appliance", Page 7

3.3 AquaSensor

The AquaSensor is an optical measuring device (light

barrier) which measures the turbidity of the washing water.

You can save water with the AquaSensor.

The operation of the AquaSensor depends on the selected

cycle. If the soiling level is high, the washing water is

drained off and replaced with fresh water. If the soiling

level is lower, the washing water is used in the next rinse,

so reducing water consumption by 3-6 liters. In the Auto

cycles the temperature and run time are additionally

adjusted to the level of soiling.

3.4 Sensors

The sensors adjust the cycle sequence and strength in the

Auto cycles depending on the level and type of soiling.

The sensor has different sensitivity levels that can be

changed in the basic settings.

Sensor setting

Description

SE:00

Optimal setting for mixed loads

and heavily soiled dishware.

Saves both energy and water.

SE:01

Adjusts the cycle strength for

effective removal of food

remnants even with low soiling

levels. Energy and water

consumption are adjusted

accordingly.

SE:02

Adjusts the cycle strength for

difficult conditions of use, e.g.

stubborn dried-on food remnants.

Recommended setting when

using organic or ecological

detergents containing low levels

of active agents. Energy and

water consumption are adjusted

accordingly.