Bosch DISHWASHER Manual de instrucciones de instalación - Página 9

Imprimir página

Bosch DISHWASHER Manual de instrucciones de instalación

Plumbing Preparation/ Dishwasher Preparation

PLUMBING PREPARATION (continued)

Drain Plumbing

Dishwasher Connection Piece

If the dishwasher is to drain either directly into the house-

hold drain plumbing or through an air gap, install a dish-

washer connection piece under the sink, as shown in

Figure 8, letter A.

Installing an Air Gap

If local ordinances require an air gap, as shown in Figure 9,

letter B, install it according to the manufacturer's instruc-

tions.

Disposer

If a disposer is to be installed, as shown in Figure 10, letter

Figure 8

C, install it according to the manufacturer's instructions.

Figure 9

Whether the disposer is newly installed or existing, remove

the disposer's dishwasher drain connection plug.

DISHWASHER PREPARATION

Dishwasher preparation involves four tasks:

• Installing the Mounting Brackets

• Removing the Toe Panel

• Installing the 90° elbow fitting

• Junction Box Preparation

Installing the Mounting Brackets

CAUTION

: Before installing the supplied mounting

brackets (letter E in the Materials Supplied section of this

manual), decide which method of securing the dishwasher

into its enclosure will be used. Once the mounting

brackets are installed on the dishwasher, removing them is

difficult and will damage the mounting brackets and the

Figure 10

dishwasher.

The dishwasher can be secured into its enclosure in two

ways:

1) Top Mount is used for countertops made of wood or

other materials that can easily drilled. Orient the mounting

brackets as shown in Figure 11, letter A, and position the

two small tabs on the mounting brackets over the two slots

on the dishwasher's front corners. Push the mounting

brackets down firmly to insert the tabs into the slots.

2) Side Mount is used for countertops made of marble,

granite, or other very hard materials that cannot be easily

drilled. Bend the mounting brackets along the small holes

and in the same direction as the two small tabs. Orient the

mounting brackets as shown in Figure 11, letter B, and

position the two small tabs on the mounting brackets over

the two slots on the dishwasher's front corners. Push the

mounting brackets down firmly to insert the tabs into the

slots.

Figure 11