Bosch DISHWASHER Instrumentos operativos - Página 6

Navegue en línea o descargue pdf Instrumentos operativos para Lavavajillas Bosch DISHWASHER. Bosch DISHWASHER 24 páginas. Dishwasher bosch
También para Bosch DISHWASHER: Manual de instrucciones (30 páginas), Manual de instrucciones de instalación (34 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (38 páginas), Manual de instrucciones (42 páginas), Manual de instrucciones (32 páginas), Manual de instrucciones (36 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (24 páginas), Manual de instrucciones (26 páginas), Manual de instrucciones (40 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (29 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones de instalación (50 páginas), Manual de instrucciones de instalación (20 páginas), Instrucciones de uso (36 páginas), Manual de instrucciones (25 páginas), Manual de instrucciones (46 páginas), Manual de instrucciones (31 páginas)

Imprimir página
Bosch DISHWASHER Instrumentos operativos
aus

Rinse aid %

As soon as the rinse-aid refill indicator X
is lit on the fascia, there is still a rinse-aid
reserve of 1 – 2 rinsing processes. Refill
with rinse aid.
The rinse aid is required for stain-free
utensils and clear glasses. Use only rinse
aid for domestic dishwashers.
Combined detergents with rinse-aid
component may be used up to a water
hardness of 21° dH (37° fH, 26° Clarke,
3.7 mmol/l) only. If the water hardness is
over 21° dH, rinse aid must be used.
– Open the dispenser 1b by pressing
and lifting the plate on the cover.
– Carefully pour rinse aid up to the max.
mark in the filler opening.
– Close cover until it clicks shut.
– To prevent excessive foam formation
during the next rinse cycle, remove any
rinse aid which has run over with a
cloth.
6

Setting amount of rinse aid

The amount of rinse aid dispensed can be
set in 4 stages. Accordingly 0, 1, 2 or 3
displays are lit (see water hardness table).
Factory setting: 2.
Do not change the amount of rinse aid
unless streaks (select lower
setting) or water stains (select higher
setting) are left on the utensils.
– Close the door.
– Switch on ON/OFF switch (.
The Cleaning display )" flashes.
– Press and hold down the START
button @.
– Rotate programme selector 8 until
the rinse aid refill indicator X flashes.
– Release button.
The rinse aid refill indicator X flashes
and the displays h and ` are lit
(= Setting 2).
To change the setting:
– Rotate programme selector 8 until
the required setting has been selected.
– Press START button @.
The rinse-aid refill indicator X goes
out. The selected setting is saved.
Switching off rinse-aid refill
indicator
If the rinse-aid refill indicator X is
impaired (e.g. when using combined
detergents containing rinse-aid
component), it can be switched off.
– Proceed as described under "Setting
amount of rinse aid" and select
setting 0.
The rinse aid refill indicator X is now
switched off.
PD[