Bosch DISHWASHER Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Lavavajillas Bosch DISHWASHER. Bosch DISHWASHER 25 páginas. Dishwasher bosch
También para Bosch DISHWASHER: Manual de instrucciones (30 páginas), Manual de instrucciones de instalación (34 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (38 páginas), Manual de instrucciones (42 páginas), Manual de instrucciones (32 páginas), Manual de instrucciones (36 páginas), Manual de instrucciones (30 páginas), Manual de instrucciones (24 páginas), Manual de instrucciones (26 páginas), Manual de instrucciones (40 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (29 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones de instalación (50 páginas), Manual de instrucciones de instalación (20 páginas), Instrumentos operativos (24 páginas), Instrucciones de uso (36 páginas), Manual de instrucciones (46 páginas), Manual de instrucciones (31 páginas)

Imprimir página
Bosch DISHWASHER Manual de instrucciones
aus

Rinse aid

As soon as the rinse-aid refill
indicator H is lit on the fascia, there is
still a rinse-aid reserve of 1 – 2 rinsing
processes. Refill with rinse aid.
The rinse aid is required for stain-free
utensils and clear glasses. Use only rinse
aid for domestic dishwashers.
Combined detergents with rinse-aid
component may be used up to a water
hardness of 21° dH (37° fH, 26° Clarke,
3.7 mmol/l) only. If the water hardness is
over 21° dH, rinse aid must be used.
– Open the dispenser 1b by pressing
and lifting the plate on the cover.
– Carefully pour rinse aid up to the max.
mark in the filler opening.
– Close cover until it clicks shut.
– To prevent excessive foam formation
during the next rinse cycle, remove any
rinse aid which has run over with a
cloth.
6

Setting amount of rinse aid

The amount of rinse aid dispensed can be
set from :
setting :
Do not change the amount of rinse aid
unless streaks (select lower setting) or
water stains (select higher setting) are left
on the utensils.
– Open the door.
– Switch on ON/OFF switch (.
– Hold down programme button # and
press START button h until : .... is
indicated on the digital display.
– Release both buttons.
– Press programme button # until the
factory set value :
the digital display 8.
To change the setting:
– Press programme button 3.
Each time the button is pressed, the
set value increases by one level; when
the value of :
the display jumps back to :
– Press START button h.
The set value is saved.
– Close the door.
Switching off rinse aid refill
indicator
If the rinse-aid refill indicator H is
impaired (e.g. when using combined
detergents containing rinse aid
component), it can be switched off.
– Proceed as described under "Setting
amount of rinse aid" and set the value
to :
The rinse aid refill indicator H is now
switched off.
max
to :
. This is the factory
.
is indicated on
has been reached,
.
(off).