Bosch FAP-OC 500Series Manual del usuario - Página 14

Imprimir página

Bosch FAP-OC 500Series Manual del usuario

en-us Cleaning and maintenance

Display

Function

Time for setting a cooking zone after selec-

tion

– Unlimited: The last selected cooking zone

remains selected. You can adjust the settings

without having to select it again.

– Limited: You can adjust the settings for

the selected cooking zone within 10 seconds.

After 10 seconds you have to select the

cooking zone again.

Results for suitability test for cookware

– Not suitable.

– Not ideal.

–Suitable.

Restore factory settings

– Off

– Restore appliance to factory settings

Factory setting (may vary according to model)

The cooktop's maximum power output is shown on the

rating plate

Changing the basic settings

Requirement: The cooktop is turned off.

Turn on the cooktop.

Within the next 10 seconds, press Timer for about

4 seconds.

The first four displays provide the product information.

To call up the individual displays, touch the control

panel.

Product information

Customer Support index (CI)

Production number

Production number 1

Production number 2

Press Timer to access the basic settings.

a In the left display

and flash alternately.

a In the timer display

lights up.

Press Timer repeatedly until the desired setting lights

up in the left display.

Set the desired option in the settings area.

These marks are registered trademarks of their respective owners. All other trademarks are trademarks of BSH Home

Appliances Corporation or its affiliated companies.

Press Timer for about 4 seconds.

a The setting is saved.

Tip: Press On/Off to leave the basic settings and turn off

the cooktop.

6.10 PowerManager function

You can use the PowerManager function to set the total

power of the cooktop.

The cooktop is set at the factory; the cooktop's maximum

power is shown on the rating label. You can use this func-

tion to adjust the configuration to the requirements of each

electrical installation.

In order to not exceed this set value, the cooktop automat-

ically distributes the available power as needed between

Display

the cooking zones that are switched on.

While the PowerManager function is activated, the output

of a cooking zone may temporarily fall below the nominal

value. In order to not exceed this set value, the cooktop

automatically distributes the available power as needed

⁠ .

between the cooking zones that are switched on . The

appliance regulates and selects the highest power level

automatically.

For more information, go to

→ "Basic settings", Page 13

7 Cleaning and maintenance

Cleaning and maintenance

To keep your appliance working efficiently for a long time,

Cleaning and maintenance

it is important to clean and maintain it carefully.

7.1 Cleaning agents

You can purchase suitable cleaners and glass scrapers

from Customer Support or in our online shop www.bosch-

home.com/us/shop.

Tip: Bosch cleaners have been tested and approved for

use on Bosch appliances. Other recommended cleaners

do not constitute an endorsement of a specific brand.

Recommended cleaning agents

¡ Glass ceramic cooktop cleaner

¡ BonAmi®

¡ Soft Scrub®

¡ White vinegar

(without bleach)