Bosch SB Series Manual de instrucciones - Página 26

Imprimir página

aus Operating the appliance

Operating the

appliance

AquaSensor *

p l i a n c e

O p e r a t i n g t h e a p

* depending on the features of your

A q u a S e n s o r

dishwasher

The Aqua sensor is an optical

measuring device (light barrier) which

measures the turbidity of the rinsing

water.

The AquaSensor is used according

to the programme. If the AquaSensor is

active, "clean" rinsing water can be

transferred to the next rinse bath and

water consumption can be reduced by

3–6 litres. If the turbidity is greater,

the water is drained and is replaced

with fresh water. In the automatic

programmes the temperature

and running time can also be adjusted

to the degree of soiling.

Switching on the appliance

Turn tap fully on.

Switch on ON/OFF switch (.

The displays for the last programme

and last additional function selected

flash. These settings will be retained

unless another 0 programme key

is pressed. The expected

programme duration flashes on the

digital display h.

Press the START button P.

Programme sequence starts.

Remaining running time

display

When the programme is selected, the

remaining programme time is indicated

in the display window h.

The running time is determined during

the programme by the water

temperature, the quantity of dishes as

well as the degree of soiling and may

vary (depending on the selected

programme).

Time preselection *

* depending on the configuration of

T i m e p r e s e l e c t i o n

your specific dishwasher

You can delay the start of the

programme in hourly steps by up to 24

hours.

Here's how to set up the delay:

Switch on ON/OFF switch (.

Press the timer programming button

@ + repeatedly until h œ ‹‚

appears in the display window.

Keep pressing the timer

programming button @ - or + until

the desired time is displayed.

Press START button P.

The delay timer has been activated.

To clear the specified delay, press

the button @ - or + repeatedly until

h œ ‹‹ appears in the display

window.

Until the programme has started, you

can change your selection in any way

you like.

Programme end

The programme has finished when the

value ‹:‹‹ appears in the display

window h.