Bosch SGS 09T06 Manual de instrucciones - Página 16
Navegue en línea o descargue pdf Manual de instrucciones para Lavavajillas Bosch SGS 09T06. Bosch SGS 09T06 36 páginas.
Imprimir página
en
auto 3in1
The use of so-called combined detergent
products may make the use of rinse aid
and/or salt unnecessary.
There are currently several types of
combined detergent products available.
2in1: They contain detergent and rinse
aid or salt function.
3in1: They contain detergent, rinse aid
and salt function.
4in1: They contain a detergent,
rinse-aid, salt function and an additional
glass protection component.
In addition, other combined products with
a comparable effect are offered according
to the manufacturer.
>>> Always check the type of detergent
or combined product which you
are using!
Always follow the operating instructions
or the information on the packaging.
The rinse programme is automatically
adjusted in order to obtain the best
possible rinsing and drying result.
Observe the following important
information if using combined cleaning
products:
Regeneration salt is not required up to
a water hardness of 21_ dH (37_ fH,
26_ Clarke, 3.7 mmol/l) only. No other
settings on the appliance are required.
Salt is still required if the water
hardness is above 21_ dH (37_ fH,
26_Clarke, 3.7 mmol/l). Fill the salt
dispenser with salt
setting 6 on the water softening system.
If in doubt, please contact the detergent
manufacturer, especially if:
the utensils are very wet at the end
of the programme.
limescale forms.
16
Downloaded from DishWasher-Manual.com Manuals
and select
26
Note
Optimum rinsing and drying results can be
obtained by using standard detergents in
conjunction with separate application of
salt and rinse aid.
Observance of the operating instructions
or information on the packaging of the
combined detergents determines their
effectiveness.
Note
Even if the rinse aid and/or salt refill
indicator is lit, the rinse programme runs
correctly when 3in1 products are used.
If the rinse aid refill indicator or salt refill
indicator is defective and you would like to
switch it off, proceed as follows:
Switching "Add rinse aid" off
and on:
Switch on the appliance with the main
switch
.
1
Keep pressing button M/OK
the "rinse aid" setting is displayed.
By pressing buttons – or +
can select a set value between 0 and 6.
The factory setting is "rinse aid 4".
To switch off, select position "0"
Press the button M/OK
value is saved and you are returned
to the Start menu.
If the set value "0" is selected, rinse aid
is not dispensed. Low rinse aid is not
displayed.
until
2
, you
3
The set
2