Dragonfly DFM-TAB-92 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Pantalla motorizada Dragonfly DFM-TAB-92. Dragonfly DFM-TAB-92 8 páginas. Dfm-tab screens
También para Dragonfly DFM-TAB-92: Manual de instalación (17 páginas)

Imprimir página

5. To lock the screen in place, close and tighten the Locking

Screw on the mounting brackets. This will keep the screen

locked firmly in place.

Installing the hanging bracket:

1. Choose tapping screws with hangers, or other screws with hangers (not included) according to your ceiling material.

2. Drill two identical holes with an electric drill. Make sure the holes

are aligned horizontally with the wall. Fasten hangers

(not provided) into the ceiling.

3. Use the Ceiling Hanging Screws (F) provided with the accessory

package to fix the Ceiling Hanger (E) into the Floating Mount Bracket (A).

Ensure the screws on the bracket are tightened and secure.

4. Follow steps three through five from the "Installing the bracket on

the wall or ceiling" section to attach the casing to the brackets. After

the casing is locked into the brackets, hang the screen on to the hooks.

LED Remote Controller

STOP

DOWN

MICRO-DOWN

MICRO-UP

How to install the batteries:

1. Turn the controller over, push to open

the cover as guide arrow indicates.

2. Put batteries in according to guide

3. Close the cover

IR REMOTE INSTRUCTIONS

1. To raise the screen, push "UP"

2. To lower the screen, push "DOWN"

3. To hold the screen at desired position, push "STOP"

4. To raise the screen with micro adjustments, push "MICRO-UP"

5. To lower the screen with micro adjustments, push "MICRO-DOWN"

Caution:

- The shortest distance between receiver and controller is 0.5 meter

- Controller will work within 30 degrees horizontally from the center

of the IR receiver within 30 feet from screen

- The controller will not work if the signal is covered

- Avoid high temperatures and high humidity

- Change the batteries when the signal is weak using (2) AAA,

and take the batteries out of the controller when not being used

for long periods of time