Dragonmobility SnapDragon Manual del usuario - Página 17

Navegue en línea o descargue pdf Manual del usuario para Silla de ruedas Dragonmobility SnapDragon. Dragonmobility SnapDragon 20 páginas.

Dragonmobility Ltd

SnapDragon – Owner's Manua

Issue 1,8

Once inside the car, the free-wheel facility can be used to position the powerbase more

conveniently if necessary (see above). However, once in position, make sure that the drive

is connected, so that the electronic brake is on, by clicking the mushroom knobs back into

place. For added security, you may also wish to operate the manual brakes (see Fig:9).

The other parts of the SnapDragon, i.e. the seat and elevator, can then be lifted into the

luggage compartment and packed carefully with padding to avoid any damage to paintwork

or fibreglass.

Loading the SnapDragon without Ramps

The SnapDragon will disassemble further in order to transport the SnapDragon with the

batteries stored separately. This may be necessary for air travel, when batteries need to be

transferred to a separate battery box, or possibly for coaches with no wheelchair access,

etc.

For this purpose, the SnapDragon will need to be disassembled as above, with the elevator

removed. Then remove the battery compartment "bootlid"cover by pulling downwards with

your thumb on the black rubber catch in the centre at the very back of the cover. You will

find that the hook underneath unclips. Then hold the cover with two hands under the back

edge and pull it backwards and up.

Pull both the grey battery connectors apart and lift each battery separately out of the

battery compartment. The powerbase can now be lifted by two adults, being careful not to

trap fingers in any moving parts, particularly the back transom bar on which the castors are

mounted. Remember that the back castors are deliberately heavy for stability reasons, so

the back is heavier than the front. The "bootlid" cover can be re-attached for transport if

required, once the powerbase has been stowed safely.

Page 15