DragonSaw DRS-2022H8 Manual de seguridad y uso - Página 3
Navegue en línea o descargue pdf Manual de seguridad y uso para Sierra DragonSaw DRS-2022H8. DragonSaw DRS-2022H8 13 páginas.
Imprimir páginaThe saw is designed to safely cut only concrete, masonry and stone.
Visually inspect the saw for any defect or broken parts before using.
NEVER operate a defective saw or blade.
If damages or defects are noticed, have the saw repaired by trained and
experienced personnel only before using.
Keep the saw clean, free from any accumulated debris, slurry, oil, grease or any
other substances that would impair the safe operation of the saw.
Only a trained person who has read and understands the operating instruction, has
experience with the use and operation of saws, the related usage of the tool and
completely understands the instruction manual in conjunction with his experience
and knowledge in the safe operation of saws should operate the saw.
WARNING!
Keep loose or torn clothing or body parts away from any moving parts.
Serious injury or death may result.
Plan your cutting operation before starting to prevent any injury or death by an
unsecured or falling part of the cut material or the binding of the blade caused by an
unsecured part being cut.
Have a person trained and qualified in the detection of electrical power location
inspect for live wires, live cables or pipes that may be near, behind or embedded in
the material being cut to de-energize before attempting to start cutting. Make sure
that the tool is properly grounded and wear the required protective equipment. Live
electrical power will cause serious injury or death.
Inspect the blade for any deformation, crack, missing parts, segments, any other
unusual sign of metal fatigue or defects.
Have the blade replaced immediately before reusing with one specified by the
manufacturer for this particular saw or tool.
The blade should only be changed by a trained or authorised person in the repair of
the tool.
WARNING!
To safely operate the tool, you should be on solid ground with a firm grip
on both handles of the tool.
WARNING!
DO NOT operate on a slippery or uneven area.
DO NOT allow anyone in front of the tool or in line with the blade while working,
flying debris or slurry may INJURE someone.
DO NOT operate without all the guards in place and in good working order.