Dragster DDM Series Manual de instalación y funcionamiento - Página 6

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Amplificador Dragster DDM Series. Dragster DDM Series 8 páginas.

Imprimir página

• Use capacitors on the alternator, horn and ignition.

• Run the shielded input cable away from any other cables, as they are particularly prone to interference.

• Install a separate power source (+12V) for the sound system. Use a fuse/circuit breaker 30 centimeters

from the battery as the best precaution.

• Ground the amplifier properly. Remove paint from the chassis at the selected point, and connect the

wire using a grounded terminal. In order to prevent rust, insulate it with paint.

Do not loop the ground. Avoid using multiple grounds. If possible, use a star connection, in which all the

grounds run from a single point.

Technical Specifications

MODELS

Channels:

Power @ 14.4V - 1 Ohm (RMS):

Power @ 14.4V - 2 Ohms (RMS):

Min. Output Impedance:

Input Impedance:

Input Sensitivity:

T.H.D:

Signal to Noise Ratio:

Freq. Resp. (-3dB) @ 8 Ohm:

Crossover Low Pass:

Bass Boost:

Frequency Bass Boost:

Over Clip (Power):

Power Supply:

Consumption Music:

Consumption BASS:

Dimensions (H x W x L):

Weight:

The measured data are based on equipment from the our laboratory. Frequency reference of

1Khz with THD+N to ≤10% in impedances referring to the indicated in each measurement. The

electronic components and the manufacturing process can present manufacturing variations,

thus leading to a variation in the measurements made.

Any updates made in this manual will be available for consumers to consult without any charge on the brand's

site. It is recommended that the updated manual be consulted whenever necessary.

Images contained in this manual are merely illustrative and may differ from the actual product.

DDM5000.1

5050W

3230W

1 Ohm

26K Ohms

0.2V

≤ 10% THD

>90dB

10Hz ~ 15KHz

50Hz ~ 15KHz

±12dB

40Hz ~ 120Hz

+15%

9.5 ~ 15Vdc

4.1 ~ 250A

4.1 ~ 500A

76 x 258 x 315 mm

4.3 Kg

DDM8000.1

8000W

4500W

1 Ohm

25K Ohms

0.2V

< 10% THD

>90dB

10Hz ~ 15KHz

50Hz ~ 15KHz

±12dB

40Hz ~ 120Hz

+15%

9.5 ~ 15Vdc

5.3 ~ 396 A

5.3 ~ 750 A

76 x 258 x 450 mm

6.4 Kg

DDM10500.1

10500W

7000W

1 Ohm

25K Ohms

0.2V

≤ 10% THD

>90dB

10Hz ~ 15KHz

50Hz ~ 15KHz

±12dB

40Hz ~ 120Hz

+15%

9.5 ~ 15Vdc

6.7 ~ 495A

6.7 ~ 990A

76 x 258 x 515 mm

7.8 Kg