Drainvac 2AC9922-CT Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Aspiradora Drainvac 2AC9922-CT. Drainvac 2AC9922-CT 15 páginas.
También para Drainvac 2AC9922-CT: Manual del usuario (15 páginas), Manual del usuario (15 páginas)

Imprimir página

ELECTRICAL POWER SUPPLY

GROUNDING INSTRUCTIONS

These units must be grounded. If it should malfunction or breakdown, grounding

provides a path of least resistance for electric current to reduce the risk of electric

shock. This appliance is equipped with a cord having an equipment-grounding

conductor and grounding plug. The plug must be inserted into an appropriate

outlet that is properly installed and grounded in accordance with all local codes

and ordinances.

WARNING - Improper connection of the equipment-grounding conductor can result in

a risk of electric shock. Check with a qualified electrician or service person if you are in

doubt as to whether the outlet is properly grounded.

DO NOT MODIFY THE PLUG PROVIDED WITH THE UNITS -

IF IT DOES NOT FIT THE OUTLET, HAVE A PROPER OUTLET INSTALLED

BY A QUALIFIED ELECTRICIAN.

These units are for use on a nominal 120V or a 230V circuit and have a grounding

attachment plug that looks like the one illustrated below. Make sure that the electrical

cord is connected to an outlet having the same configuration as the plug.

NO ADAPTOR SHOULD BE USED WITH THIS APPLIANCE.

Grounded

Grounded pin

*Illustration of a north-americain electrical outlet

Outlet

MAINTENANCE PROCEDURES

Each system requires a minimum maintenance, without any exception.

MOTOR BRUSHES

Beyond the occasional external cleaning, we recommend that you inspect your motor

brushes after 500 hours of use to check how worn they are and have them replaced

if necessary. On average, this inspection should occur once every 3 to 5 years. When

the time comes, contact your retailer or distributor for this maintenance procedure. Take

note that the motor brushes are not included in the warranty.

CARTRIDGE FILTER AND DUST BAG

You must clean the cartridge filter and replace the dust bag periodically. This will

prevent your vacuum from losing any power and will extend its lifespan.

• The dust bag CANNOT be washed or emptied. It must be replaced by a new one. If

you notice a flagrant decline of power, it may be a sign of a full dust bag and must

be changed. DO NOT CHANGE THE DUST BAG WHILE THE UNIT IS RUNNING.

• The cartridge filter can be air cleaned or water cleaned periodically, but must be

replaced every 3 years. If water cleaned, it must be COMPLETLY DRY before

reusing.

Here is how to procede:

1. Release the clamps between the main unit and the tank.

2. Remove the bag and discard it (if you must).

3. Clean or wash the filter and let it dry.

4. Place the filter.

5. Place the new dust bag.

6. Reattach the tank to the main unit.

*IF THE UNIT IS USED EITHER WITHOUT THE FILTER OR THE DUST BAG,

THE WARRANTY WILL BE VOIDED.