DRAKE HDE24 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Media Converter DRAKE HDE24. DRAKE HDE24 4 páginas. High-definition encoder
También para DRAKE HDE24: Manual de instrucciones (4 páginas)

Imprimir página

2 Specifications

Notes

1. If the front panel display shows

INVALID VIDEO, the incoming

video is not correct for the input

type and resolution settings. If the

front panel display shows INVALID

AUDIO, the HDMI embedded audio

source is not available or not PCM

(uncompressed).

2. This encoder will only support the

specific video resolutions outlined

in the Specifications table.

3. This encoder does not support

HDMI copy protection (HDCP). All

HDMI sources must be un-encryp-

Video Inputs

HDMI™

Component

Composite

Closed Captioning Input

Audio Inputs

RCA-type L+R

HDMI Embedded Audio

Video Options

Input Video Modes Supported

Encoder Format

Video Adjustments

MPEG4 Profile support

Bitrate

Audio Options

Encoder format

Output Bitrate

Rear Panel Connections

1: Component video input. Y input is used for

Composite video input as well.

2: Analog audio input.

3: Service port. Used during firmware updates of unit.

4: HDMI input. Supports embedded PCM audio.

Does not support HDCP/Copy protection.

5: Closed captioning data input. Used during high-

definition encodes to insert closed-caption data

from a composite video source.

Manufactured under license from Dolby Laboratories

4. Composite video is supported -

5. Closed-captioning data is

6. Firmware updates may be re-

1x HDMI input - to protect copyrighted content, this encoder

does not support HDMI copy protection (HDCP)

1x HD Component (YCrCb) video input

1x 1V p-p +/- 3dB, 480i only

1x 1V p-p +/- 3dB, 480i composite video (used for Closed

Captioning data extraction during HD encoding)

1x 1Vrms nominal, 3.5Vrms maximum

Supports PCM (uncompressed) digital audio from HDMI

480i

(640x480/720x480 @30fps)

480p

(640x480/720x480 @60fps)

720p

(1280x720 @60fps)

1080i

(1920x1080 @30fps)

Supports auto-scan for input resolution

MPEG2 or MPEG4 H.264

Brightness, contrast, hue, and saturation

Simple, Advanced Simple, High

Up to 19Mbps (depends on input format)

Dolby® AC-3 or MPEG1 layer 2

320kbps

ted.

use the Component Y (green-

colored) input connector.

automatically extracted when the

encoder is in Composite mode. All

other modes require a captioned

composite video source input to

the Caption connector.

quired for MEQ1000 or EH24

chassis. MEQ1000s must be up-

dated to v1.4 or later. EH24s must

be updated to v2.3 or later.