Bosch Programme Table Manual de instrucciones - Página 9

Imprimir página

Bosch Programme Table Manual de instrucciones

What to do if...

If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales

service. We will always find an appropriate solution and will avoid unnecessary visits by

engineers. Trust the expertise of the manufacturer and rest assured that the repair will be

carried out by trained service technicians using original spare parts. The contact details of your

local after-sales service can be found in the enclosed after-sales service directory, or by

calling one of these numbers:

– GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.

A call set-up fee of up to 6 pence may apply.)

– IE 01450 2655

When contacting the after-sales service, please quote the appliance's product number (E no.)

and production number (FD) (see the inside of the door).

Set the programme selector to Off and remove the appliance plug from the socket.

The

Start/Stop indicator light

Mains plug plugged in?

does not come on.

Programme selected?

The

symbol and

Start/Stop

Empty the condensation container

indicator light are flashing.

Check the condensation outlet hose, if applicable (kink).

The

symbol and

Start/Stop

Clean the air cooler

indicator light are flashing.

fluff filter

The

symbol flashes.

Is the water tank empty?

Filling with distilled water

The Steam Dry - Steam Refresh

The filter in the water tank may have become dirty.

does not start.

If so, clean the filter in the water tank

Dryer does not start.

Has the

Programme set?

Ambient temperature greater than 5 °C?

Water is leaking out.

Make sure the dryer is level.

Clean the air cooler seal.

The door opens by itself.

Push the door closed until you hear it click into place.

Items crease even though the

Laundry load exceeded?

Steam Dry - Steam Refresh

Remove articles of clothing immediately after the end of the

programme has been selected.

programme, hang up and pull into shape.

Creasing.

Laundry load exceeded?

Remove articles of clothing immediately after the end of the

programme, hang up and pull into shape.

Unsuitable programme selected

Drying result is not satisfactory

Warm laundry feels damper than it actually is.

(laundry feels too damp).

The selected programme does not suit the load. Use another

drying programme or, in addition, select the time programme

Use fine adjustment for the drying result

Fine layer of limescale on the humidity sensors

Programme termination, e.g. tank full, mains power supply

failure, door open or maximum drying time reached.

Drying time too long.

Rinse the fluff filters under running water

Insufficient supply of air

Air inlet possibly blocked

Ambient temperature higher than 35 °C

The humidity in the room increases

Make sure the room is sufficiently ventilated.

significantly.

One or more programme status

Clean the filter and air cooler under running water

indicator lamps are flashing.

Check the installation conditions

Switch off, allow to cool, switch on again and restart the

programme.

The interior light (depending on the

Unplug the appliance plug, fold back the cover cap on the inside

model) does not work.

above the door (using a Torx 20 screwdriver)

and replace the bulb. Close the cover cap.

Page 4.

Page 6 "Cleaning and care". Clean the

Page 4.

Page 9.

Page 4.

Start/Stop button been pressed? Is the door closed?

Page 7.

Page 1/2.

Clean the humidity sensors

Page 6.

Page 4.

ensure that air can circulate.

Clear inlet

Page 10.

ventilate the room.

Page 10.

Safety instructions

Emergency

– Pull the appliance plug out of the socket immediately or disconnect the fuse.

ONLY use the

– in rooms inside the house.

dryer...

– for drying or unwrinkling/refreshing fabrics.

The dryer must

– be used for purposes other than those described above.

NEVER...

– be modified in terms of its technology or properties.

Hazards

– The dryer must not be used by children or persons who have not been

instructed in its use.

– Do not leave children unsupervised near the dryer.

– Keep pets away from the dryer.

– Remove all objects from pockets,

and lighters in particular

– Do not lean or sit on the door

– Open the door carefully. Hot steam may escape. The clothes and drum may

be hot

– Secure loose leads or hoses, otherwise there is a risk of tripping.

Installation

– Below 0 °C there is a possibility of frost damage.

Mains

– Connect the dryer according to specifications to an AC earthed socket,

connection

otherwise it cannot be guaranteed that the appliance is completely safe.

– The cable cross-section must be sufficient.

– Only use earth-leakage circuit breakers with the following symbol:

– The appliance plug and socket must be compatible.

– Do not use multiple plugs/connectors and/or extension cables.

– Do not touch or hold the appliance plug with wet hands

– Never pull the appliance plug out of the socket by its cable.

– Do not damage the mains lead

Operation

– Only laundry must be loaded into the drum.

Before switching on the dryer - check the contents.

– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,

grease or paint (e.g. hair setting spray, nail polish remover, stain remover,

cleaning solvent, etc.)

– Hazard caused by dust (e.g. coal dust, flour): do not use the dryer

– Do not put laundry containing foamed material/rubber in the dryer

material may be destroyed and the dryer may be damaged due to possible

deformation of the foamed material.

– Switch off the dryer once the programme has ended.

– For unwrinkling/refreshing fabrics, use distilled water only. Do not use

condensation, tap water or additives.

– Distilled/condensation water is not for drinking.

Defect

– Do not use the dryer if it is defective or if you suspect that it is.

Repairs must only be carried out by the after-sales service.

– Do not use a dryer with a faulty mains lead. To prevent risks, a faulty mains

lead must only be replaced by the after-sales service.

Page 4/6.

– Before changing the bulb of the interior light make absolutely sure you have

pulled the appliance plug from the socket

Spare parts

– Only use genuine spare parts and accessories for safety reasons.

– Dryer: unplug the appliance plug, then cut the mains lead from the appliance.

Disposal

Dispose of the dryer at an approved public disposal facility.

– Packaging: keep all packaging out of reach of babies and children.

– All materials are environmentally safe and recyclable. Dispose of in an

environmentally-responsible manner.

risk of explosion.

risk of tipping.

risk of burns.

risk of electric shock.

fire/explosion hazard.

risk of explosion.

danger of suffocation.

elastic

risk of electric shock.