Bosch Series 4 Información de uso - Página 13

Imprimir página

Display

Setting

⁠

Power limitation

Enables the total power of the hob to be lim-

ited, if necessary, based on the conditions of

your electrical installation. The available set-

tings depend on the maximum power of the

hob. You can find precise information on the

rating plate. If the function is active and the

hob has reached the set power limit,

played and you cannot select a higher power

level.

⁠

Time for selecting the cooking zone

⁠

Cookware test

You can use this function to test the quality

of the cookware.

⁠

Set circulating-air mode or air extraction

mode.

⁠

Setting automatic start

⁠

Setting the run-on

If your hob is working in air extraction mode,

the ventilation system is switched on at the

power level for approx. 6 minutes.

If your hob is working in circulating-air mode,

the ventilation system is switched on at the

power level for approx. 30 minutes.

The run-on function automatically switches

off after this time.

⁠

Restoring factory settings

Factory setting

14.2 To go to the basic settings

Requirement: The hob must be switched off.

To switch on the hob, touch

Within the next 10 seconds, touch and hold

four seconds.

Product information

Directory for the technical after-sales

service (TK)

Production number

Production number 1

Production number 2

a The first four displays provide the product informa-

tion. Touch

⁠ or

to view the individual displays.

15 Cookware test

The quality of the cookware has a major influence on

the speed and the result of the cooking process.

You can use this function to test the quality of the cook-

ware.

is dis-

⁠ .

for

Display

⁠

⁠ ⁠ .

⁠ .

Value

- Switched off. Maximum power of the hob

- 1000 W. Lowest power setting.

. - 1500 W.

...

- 3000 W. Recommended for 13 A.

. - 3500 W. Recommended for 16 A.

- 4000 W.

. - 4500 W. Recommended for 20 A.

...

- Maximum power of the hob.

- Unlimited: You can adjust the last selected cooking

zone without having to select it again.

– Limited: You can adjust the last selected cooking

zone within 10 seconds after selecting it. After this time,

you must select the cooking zone again before adjusting

it.

- Not suitable.

- Not optimal.

- Suitable.

- Configure circulating-air mode.

- Configure air extraction mode.

- Switched off.

– Switched on.

- Switched off.

- Switched on

- Individual settings

- Factory settings.

Touch

to access the basic settings.

and

light up alternately as well as as a preset

value.

Touch

⁠ repeatedly until the required function is

displayed.

Use

to select the required value.

Touch and hold

a The settings are saved.

14.3 Exiting the basic settings

Touch

to switch off the hob.

▶

Before the test, ensure that the size of the cookware

base corresponds to the size of the cooking zone be-

ing used.

Access is via the basic settings. → Page 12

Cookware test en

for four seconds.