Bosch Series 4 Información de uso - Página 25

Imprimir página

14 Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshoot-

ing information before contacting after-sales service. This will avoid unneces-

sary costs.

WARNING

Risk of electric shock!

Incorrect repairs are dangerous.

Repairs to the appliance should only be carried out by trained specialist

▶

staff.

Only use genuine spare parts when repairing the appliance.

▶

If the power cord of this appliance is damaged, it must be replaced by the

▶

manufacturer, the manufacturer's Customer Service or a similarly qualified

person in order to prevent any risk.

Fault

The appliance is not

cooling, the displays

and lighting are lit.

Side panels of the ap-

pliance are warm.

A warning tone

sounds and the tem-

perature display (refri-

gerator compartment),

and the light bar

flash.

The door alarm is

switched on.

Cause and troubleshooting

Showroom mode is switched on.

Switch off the appliance. → Page 16

Wait 2 minutes.

Switch the appliance back on. → Page 16

Wait 1 minute and then press and hold

gerator compartment) until 4 audible signals have

sounded.

After a short time, check whether your appliance is

cooling.

Not a fault. The side panels contain pipes which heat

up during the cooling process. Units touching the ap-

pliance will not be damaged by the heat.

No action required.

The refrigerator compartment door is open.

Close the refrigerator compartment door.

▶

Troubleshooting en

(Refri-