Draper SLX12 Folleto y especificaciones - Página 6
Navegue en línea o descargue pdf Folleto y especificaciones para Pantalla de proyección Draper SLX12. Draper SLX12 16 páginas. Video projector lift
También para Draper SLX12: Instrucciones de instalación y funcionamiento (4 páginas)
Imprimir página
Scissor Lift Series—
SL & SLX
Scissor lift with "store, show and service"
positions.
Draper's Scissor Lift will retract your projector
to ceiling level or above, then lower it to the exact
projection and service positions you require. Draper
factory sets all three positions—"store", "show" and
"service"—to your specifications, and adjustments
are easy after installation.
A patented design with scissors on the left, right and
back sides of the unit stabilize the projector from
any sway both laterally and front–to–back.
Projectors can be bolted directly to the lift's bottom
pan, or mounted with the optional Low Profile
Mount (see page 5).
The movement of the pan is driven by a gearmotor with a powerful,
reliable metal chain drive system. Each lift is equipped with a fail-safe
inertial safety belt system, and a cable management system that includes
a pre-wired power cable on the back scissor, bringing 110v current right
to your projector. Operation is v; switching is 12v. Lifting capacity is
lbs.
SL Models lower projector up to
Seven Scissor Lift SL models offer "service" positions ranging from 4' to
10'. Small footprint 23˝ wide x 23
SLX Models lower projector up to
Seven Scissor Lift SLX models offer "service" positions ranging from
to . A slightly larger footprint ( wide x ½ deep) allows for the
extended travel with no loss of stability.
System Options
•
Ceiling Closure Panels for SL & SLX Series—Universal ceiling closure,
with a recess to accept ceiling tile, or with a smooth surface finished in
white. Six sizes available. Select size based on maximum size of projector or
other equipment being used. See specifications on the Draper website
www.draperinc.com/go/ScissorLift.htm.
• Ceiling Finish Kit—Ceiling closure panel and ceiling trim ring to finish
ceiling opening.
Dimensions & Data—Scissor Lift SL Series
Model Number
Height of lift in closed position
1
Max. down travel (service position)
Approx. travel time to service position
Net weight (lbs.)
Dimensions & Data—Scissor Lift SLX Series
Model Number
Height of lift in closed position
1
Max. down travel (service position)
Approx. travel time to service position
Net weight (lbs.)
1
Only height of Scissor Lift in closed position. Overall height of projector, plus optional mount, plus optional ceiling closure, plus optional plenum
housing adds to overall height of equipment installed above ceiling. Low Profile Mount and Universal Projector Bracket add ⅞ to height.
6
⁄
˝ deep.
1
2
SL4
SL5
⅛
⅛
sec.
sec.
120
125
SLX11
SLX12
¾
¾
sec.
sec.
www.draperinc.com
Scissor Lift installation by Kikuchi Science Laboratory at Rise Corporation,
Tokyo, Japan. Photo courtesy of Naoki Ikeda. U.S. Patent No. D395,909.
• Plenum Housing—Height varies according to choice of projector.
Includes ceiling trim ring. Does not include ceiling closure panel. To
determine overall height of plenum housing include closed height
of Scissor Lift model, plus projector height, plus projector bracket
height, plus 5˝.
• Projector Mounting Bracket—The Low Profile Mount is described
on page 5. Projector may also be mounted flush to bottom pan of lift.
• Factory Installed Cables for Video and Projector Control.
• Ceiling Access Door—A x hinged door provides access to the SL
and SLX above a finished ceiling for maintenance or repairs without
having to damage the ceiling. Available with a white painted finish or
recessed to accept ceiling tile.
• Controls—Includes 1 wall switch. Visit website for other
control options. www.draperinc.com/go/ScissorLift.htm.
SL6
SL7
⅛
⅛
sec.
63 sec.
130
135
SLX13
SLX14
¾
¾
sec.
sec.
765-987-7999
SL8
SL9
⅛
⅛
72 sec.
sec.
90 sec.
140
145
SLX15
SLX16
SLX17
¾
¾
sec.
sec.
sec.
SL10
⅛
150
¾