Draper 400W Instrucciones para - Página 14

Navegue en línea o descargue pdf Instrucciones para para Herramienta eléctrica Draper 400W. Draper 400W 20 páginas.

BASIC JIGSAW OPERATION

9.4 GENERAL

Always wear safety goggles.

During cutting operations, make sure that the base is always resting on the workpiece.

When cutting metals, it is advisable to spread a few drops of oil on the cutting line to aid

penetration and help prolong the blade life.

Sheets should always be rested on sufficiently stable supports (chipboard or plywood tables).

In this manner dragging is avoided and the elasticity of the material is compensated for.

During use, make sure that the power supply cable does not impede working operations or

come into contact with the blade.

Small workpieces should be securely clamped in order that they remain in position during

working operations.

NOTE: When using longer blades and cutting thicker material, sideways pressure can cause

the blade to bend and start to bevel the cut edge. Keep the blade straight to ensure a

perpendicular cut.

CAUTION: Make certain the end of the blade does not contact obstructions below the

workpiece as this will cause the saw to recoil and possibly result in the blade breaking and

injury.