Draper GD13/5C Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Draper GD13/5C. Draper GD13/5C 20 páginas.
Imprimir página
- 1. Drill Press
- 2. General Information
- 3. Table of Contents
- 4. Contents/Declaration
- 5. Specification/Guarantee
- 6. Power Supply
- 7. General Safety Instructions
- 8. Additional Safety Rules
- 9. Unpacking and Checking
- 10. Getting to Know Your Drill Press
- 11. Assembly
- 12. Operation and Use
- 13. Operation and Use
- 14. Trouble Shooting
- 15. Optional Accessories
OPERATION AND USE
NO-VOLT ON/OFF SWITCH: (Fig 12)
Fig.12.
The drill is fitted with a no-volt switch with an
emergency shut-off cover ❃✌.
In the event of an emergency, closing the cover
firmly will cause the stop button to be
triggered, thus stopping the machine. To re-
open the cover, the red button requires sliding
up which in turn will release the stop button.
In the event of a power failure the drill press
will have to be manually re-started.
❃✌
To switch the drill press on, lift up the sprung
cover and push the button marked ✲✌.
To switch the drill press off, lift up the sprung
cover and push the button marked ✸✌.
To switch the drill press off in an emergency
strike the cover firmly which will trigger the
✸✌button.
- 11 -