Draper PT680V Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Draper PT680V. Draper PT680V 12 páginas. 600w orbital jigsaw
Imprimir página
SAW BLADE FITTING AND REMOVAL
Loosen the screws ✱✌ Fig.7 with the hexagon key
supplied, through the protective screen ✰✌, this will
enable the blade ✳✌ to be pulled free. Insert a new
blade and tighten the screws ✱✌. For replacement
blades refer to the optional accessories (page.9) or The
Draper Tools Catalogue.
The machine is supplied ready for use, the only
operation necessary is the insertion of the blade and
set the base into the correct position and tighten.
During cutting operations, make sure that the base is
always resting on the work piece.
When cutting metals it is advised to spread a few drops
of oil on the cutting line.
Sheets should always be rested on sufficiently stable
supports (chip-board or plywood tables). In this
manner dragging is avoided and the elasticity of the
material is compensated for.
During use, make sure that the power supply cable
does not impede working operations or come into
contact with the tool.
Small work pieces should be securely clamped in
order that they remain in position during working
operations (for example: fix in position with a clamp).
PARALLEL GUIDE (OPTIONAL ACCESSORY)
To fit the parallel guide ✴✌ (not supplied) slide
through the pressing in the base to the required
distance, tighten screws to secure. This is to be used as
a guide. Make practice cuts in a piece of scrap timber
first.
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep
your tool in good working condition. The tool bearings and gears are life-long lubricated. The
motor must be correctly ventilated during tool operation. For this reason avoid blocking the air
inlets with hands. After use disconnect the tool from the power supply and clean carefully, use
compressed air through ventilation slots.
DISPOSAL
At the end of the machine's working life, or when it can no longer be repaired, ensure that it is
disposed of according to the standard regulations of the country in which it is being used, and that
the disposal operation is carried out by specialised personnel following authorised guidelines. In
all circumstances:
– Do not abandon in the environment;
– Do not dispose of together with solid urban waste products;
– Contact the special recycling centres.
WARNING – Disconnect the plug from the power supply socket before replacing any parts.
REPLACING THE POWER SUPPLY CABLE
Check that the power supply cable is in good condition, if not have it replaced by an authorised
person.
OPERATION & USE
MAINTENANCE AND
PARTS REPLACEMENT
Fig.7
✱✌
Fig.8
✴✌
✵✌
- 8 -
✰✌