Draper 230V Grass Trimmer Instrucciones para - Página 7
Navegue en línea o descargue pdf Instrucciones para para Taladro Draper 230V Grass Trimmer. Draper 230V Grass Trimmer 16 páginas. Electric stapler/nailer
También para Draper 230V Grass Trimmer: Manual de instrucciones (16 páginas), Instrucciones para (16 páginas), Instrucciones para (20 páginas), Instrucciones para (18 páginas)
Imprimir página
5.
HEALTH & SAFETY INFORMATION
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust
related hazards.
4) Power Tool Use And Care
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tools operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from intended could result
in a hazardous situation.
5) Service
a. Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5.2
ADDITIONAL SAFETY INSTRUCTIONS
-
Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
-
Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
-
Wear eye protection.
-
Wear dust mask.
5.3
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the machine's rating plate are compatible with
the power supply you intend to connect it to.
This product comes supplied with a UK standard 3 pin plug fitted. It is designed for
connection to a domestic power supply rated at 230V AC.
This appliance is Class II† and is designed for connection to a power supply matching that
detailed on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this
appliance. Follow all the instruction supplied with the extension lead.
†Double insulated
insulation is applied to the basic insulation to protect against electric shock in the event of
failure of the basic insulation.
Apart from replacing the fuse in the plug, no other electrical work is recommended on this
drill.
: This product requires no earth connection as supplementary
7