Draper Storm Force CD180LISF Manual de instrucciones - Página 14
Navegue en línea o descargue pdf Manual de instrucciones para Taladro Draper Storm Force CD180LISF. Draper Storm Force CD180LISF 20 páginas. 18v li-ion cordless
Imprimir página
8.
BASIC CORDLESS ROTARY DRILL OPERATIONS
8.9 DRILLING WOOD AND PLASTIC
To prevent splitting around the drill holes on the reverse side, place a piece of scrap timber
under the material to be drilled.
8.10 DRILLING METAL
Metals such as sheet steel, aluminium and brass may be drilled. Mark the point to be drilled
with a centre punch to help the drill bit tip to locate. A drop of oil on the area will aid
cutting and help prolong the life of the bit.
8.11 SCREWDRIVING
To prevent slip or damage to the screw head, match the screwdriver bit to the screw head
size. To remove screws, move the direction switch to the reversing position and apply
pressure to the screw head and depress the trigger slowly).
Screwdriver bits are consumable items.
Note: Before drilling, check that there are no hidden hazards such as electrical cables, water
or gas pipes running below the surface by using a metal/voltage detector.
14