Draper STORMFORCE CD108SF Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Taladro Draper STORMFORCE CD108SF. Draper STORMFORCE CD108SF 20 páginas. 10.8v cordless rotary drill - bare

Imprimir página

BASIC CORDLESS ROTARY DRILL OPERATIONS

8.1 DUST AND SWARF

A correctly fitted dust mask, suitable for the activity and in accordance to the relevant

standard must be worn.

Swarf produced by metal drilling is extremely sharp. Take precautions when clearing swarf.

The burr left on the hole is also sharp and should be removed with a suitable tool.

Always wear safety goggles.

WARNING: Drill bit will be hot after use.

8.2 INSTALLING AND REMOVING BITS - FIG. 1

The drill is fitted with a keyless chuck, this means that a

chuck key is not required to secure the drill or

screwdriver bit.

i. Place the drill bit shoulder into the chuck as far as it

will go.

ii. Tighten the chuck firmly.

Note: Short screwdriver bits need only be inserted to the

depth of the hexagon shank before tightening chuck by

hand.

8.3 LED WORK LIGHT - FIG. 2

To aid drilling and screwdriving in confined,

inadequately lit spaces, the LED work light

automatically illuminates when the trigger is activated.

8.4 FORWARD/REVERSE SELECTOR - FIG. 3

The switch determines the direction of rotation of the

chuck, i.e. clockwise or anticlockwise.

Stop the drill and push switch

right.

NOTE: When the direction switch is pushed to the left,

the chuck will rotate clockwise.

Before operation, check that the switch is set in the

required position. Do not change the direction of

rotation until the chuck comes to a complete stop.

ii.

When the drill is not in use move the direction

switch to the neutral position (the middle setting)

to lock the trigger out.

8.5 TRIGGER

When the trigger is depressed, the chuck will rotate

(provided the direction switch is set in the forward or

reverse position). This trigger switch is electronic which

enables the user to vary the speed continuously. The

speed varies according to how far the trigger switch is

depressed. The further it is depressed, the faster the

chuck will rotate. The lighter it is depressed, the slower

it will rotate.

to the left or

FIG.1

FIG.2

FIG.3