Draper 83628 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Sierra Draper 83628. Draper 83628 20 páginas. 710w 230v reciprocating saw
También para Draper 83628: Manual del usuario (20 páginas)

Imprimir página

HEALTH & SAFETY INFORMATION

g) If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of dust collection can reduce dust

related hazards.

4) Power Tool Use And Care

a) Do not force the power tool. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool

that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power

tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the power tools operation. If

damaged, have the power tool repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from intended could result

in a hazardous situation.

5) Service

a. Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

5.2

ADDITIONAL SAFETY INSTRUCTIONS

Reciprocating Saws:

- Always use in conjunction with a suitable dust extraction device.

- Always wear a dust mask and suitable eye protection.

5.3

CONNECTION TO THE POWER SUPPLY

Make sure the power supply information on the machine's rating plate are compatible with

the power supply you intend to connect it to.

This product comes supplied with a UK standard 3 pin plug fitted. It is designed for

connection to a domestic power supply rated at 230V AC.

This appliance is Class II† and is designed for connection to a power supply matching that

detailed on the rating label and compatible with the plug fitted.

If an extension lead is required, use an approved and compatible lead rated for this

appliance. Follow all the instruction supplied with the extension lead.

†Double insulated

insulation is applied to the basic insulation to protect against electric shock in the event of

failure of the basic insulation.

Apart from replacing the fuse in the plug, no other electrical work is recommended on this

machine.

: This product requires no earth connection as supplementary