Draper BS355A Manual de instrucciones - Página 16
Navegue en línea o descargue pdf Manual de instrucciones para Sierra Draper BS355A. Draper BS355A 20 páginas. 360mm bandsaw
Imprimir página
- 1. General Information
- 2. Table of Contents
- 3. Contents/Declaration
- 4. Specification/Guarantee
- 5. Power Supply
- 6. General Safety Instructions
- 7. Additional Safety Rules
- 8. Unpacking and Checking Contents
- 9. Getting to Know Your Bandsaw
- 10. Assembly
- 11. Operation and Use
- 12. Operation and Use
- 13. Tips on Using Your Bandsaw
- 14. Tips on Using Your Bandsaw
- 15. Maintenance/Optional Accessories
CHANGING TYRES
Eventually the rubber tyres on the bandsaw wheels will wear due to the constant contact of
the sharp teeth of the blade. Remove the blade, lift the edge of the tyre with a small
screwdriver and the tyre can be worked off the wheel easily.We recommend that the three
tyres be changed at the same time. (See Spare Parts Listing/Drawing). Refit blade
BLADE GUIDES
Blade guides should be inspected regularly for wear or chipping.When replacing guides
replace all guides at the same time, both upper and lower. (See Spare Parts Listing/Drawing).
BEARINGS
All bearings used in the construction of your bandsaw and its motor are sealed and
lubricated for life.
CLEAN OUT
Accumulated dust and chips should be removed from inside the bandsaw frequently.
Disconnect from the power supply, remove the front cover and use a brush or vacuum
cleaner. At the end of every work session clean sawdust away from the motor vents.
BLADE BRUSH
Ensure that you check on a regular basis that the brush is in full contact with the bandsaw
blade and wheel. This will help to keep the tyres on the wheel clean and assist with the quick
and smooth run down of the bandsaw blade.
NOTE: Bandsaw blade should stop within 10 seconds of the machine being switched off as
per original set up.
Bandsaw Blades
Stock No.
Part No.
25766
BB1785
25767
BB1785
25768
BB1785
25769
BB1785
25770
BB1785
Sanding Discs
Stock No.
Part No.
25971
SD6
25972
SD6
25973
SD6
25974
SD6
25975
SD6
*1x60, 2x80, 1x100, 1x120
Sanding Belt
Stock No.
Part No.
25988
SB1785
MAINTENANCE
OPTIONAL ACCESSORIES
Blade width
Teeth
1/4"
6 skip
3/8"
6 skip
1/2"
6 skip
1/4"
6 skip
1/2"
6 skip
Grade
Quantity
60
5 pack
80
5 pack
100
5 pack
120
5 pack
*Assorted
5 pack
Grade
Quantity
60, 80, 120
3 pack
Blade length
1785mm
1785mm
1785mm
1785mm
1785mm
- 15 -
Application
Quantity
wood/plastic
wood/plastic
wood/plastic
metal
wood/metal
1 pack
1 pack
1 pack
1 pack
1 pack